novice

1979 Bj40 with 3B engine. Key will not rotate backwards to “glow” position and glow light does not appear to illuminate. So 1) starting procedure? 2)how to check/change glow light? 3)should glow light come on with the push button? Thanks for the help!

I adjusted the valves to spec and timed it with the light gun at idle (many thanks to responses to my questions on how to get this far). Previous owner had done a "partial desmog" according to people who saw pictures. Now that the rebuild is done I want to know where I need to run vac tubes to...

This was a few weeks ago. As of today I have everything back in. Just got to connect the hoses and cables, add fluids and prime the oil... I think. I adjusted the rockers/valves to spec. Shop that did the block recommended Lucas 20-50 hot rod oil for the break in. How soon should I re-tighten...

Would anyone happen to know precisely what the guy in this video is marking with a punch around 2:24 into the video? I get the bearing caps and where they attach…but is he also marking the actual bearings inside as well? So the bearings are placed in the proper orientation when it goes back...

I have a stock 200 series and have never been off-roading. It’s just been a city driver… I want to take my boys out off-roading and will be a complete novice. Are there any good trails near DC/Northern Va anyone here might recommend? It’s supposed to rain this weekend. Is it a bad idea to go...