help

  1. B

    Help to identify a 3F carby cable?

    After a bit of help... Aussie, RH FJ62 with a 3F (not 3FE). The cable going to the Idle-control valve on the back side of the carbie has a big square connector (its disconnected in the PIC). The next connector down does not seem to be connected to anything ( its a single blade connection...
  2. M

    1996 LX450 Totaled by Insurance - How to Find Comps?

    My 1996 LX450 with 350,000 miles in rough condition was involved in an accident involving the front and rear bumpers. I wasn’t at fault, but the insurance company has declared the vehicle a total loss. Unfortunately, they claim the actual cash value is only $1,200. I’m looking for some help to...
  3. Br3ntfire

    Exhaust leak --> Blown CT26 --> GTurbo + intercooler

    I can't believe I'm posting another catastrophic failure thread, but...here I am. For those not in the know, I recently had an inexplicable H55f failure, remedied by a new unit built by @cruisermatt, which due to the freight company (YRC Freight)'s careless treatment, took two tries over two+...
  4. Peppy

    Help Needed FJ40 Build

    Beach n Toys group I reached out to Frank? And he suggested that I post this here. I am reaching out to this group because your the experts in San Diego and I have a FJ40 build in my garage and need help getting it finished. It’s close but I need help wiring the rig and getting correctly setup...
  5. knuckle47

    Help Identifying this Engine Part

    Hello all, this is mounted under the distributor of a 1979 2F. I’ve never seen one but likely somebody knows what it is? It has apparently been disconnected for some time but it has a set of hefty bolts attaching it to the block and some odd passage connection further up into the block
  6. Nitro

    Help with Turbo Lag, Swap gear ratio?

    I have a 1993 HDJ81 Imported from Japan with a 1HDT 4.2L turbo diesel. Running 33 inch tires on the 16 inch wheels. Axle gear ratio I believe is 4.11. Thinking about running 4.88 or 5.13s to help with the turbo lag that is present from a dead stop to acceleration. Seems like the turbo kicks in...
  7. bryce0225

    1HDT - HELP: Excessive OIL in the intercooler pipes.

    I am a bit confused by this and I'm curious is anyone has been in a similar situation: I have a 1993 HDJ80 with a 1HDT. Stock CT26 Turbo, Stock Tune, etc. I recently built and installed a front mount air-to-air intercooler in the hopes of lowering my EGTs on long hauls and mountain passes...
  8. VitaminC914

    91 FJ80 Cruise Control Help

    I need some help. I spent quite a bit of time trying to diagnose the issue with my CC to no avail. Here is where I am at: 1.Light comes on the dash when I push the button. 2. I went through the first set of steps to diagnose the Set/Coast circuit and that is normal. (It flashes as it should)...
  9. S

    Chassis paint decision Por 15 or JDBB- help me out

    Hello murders, I'm doing all my front axle work next week and I'd like to paint the front axle and shock mounts. Will eventually be painting the whole frame as I move from front to back. Just need to decide on what paint to use. I won't be sanding too much because in generally it's pretty rust...
  10. W

    Dropped Washer in Oil Pan! Help!

    The story - I picked up a 1st gen Sequoia Limited with 220k for cheap. Diagnosis from the mechanic who looked at it said it was likely a head gasket. Oil was milky. I've always wanted to do a project like this so I pulled the trigger and started the engine tear-down. I've got the FSM for my year...
  11. shtbrwn86

    Help diagnosing Master Window circuit? 1999 LX

    Pretty sure there is an issue with the wiring. All other door window switches work. Power lock switch from passenger door works. Replaced the switch, no change. NOTHING on the master switch works. Door lock, nor none of the doors. SOMETIMES the switch will work, but 19/20 it won't do anything...
  12. BigHAAS

    Ticking, please help.

    I just bought a 2018 Taco, my first, and I want to be jazzed but there is this ticking sound making the engine sound pretty ugly. I got it with 75k miles and this guy I know had his with 95k, but his engine sound like a purring kitten. My friends say get my valves adjusted, but my brother...
  13. B

    Weber Carb HELP

    Hello- just joined this group. Need help. Fellow gave me two weber carbs. They were on english sports car. How do I Identify the model number and determine if either of these will work on an fj40? Thanks in advance for the help. Bill
  14. Darije

    HELP. All this dash light at the same time

    Sometimes while driving I get all this lights at the same time. Thay stay like that for a few moments and go... and come back without aparent reason. Sometimes they blink... Does anyone know what is the problem? I wouldn''t like to get on fire. It is 1991 HDJ80 EU spec
  15. Darije

    HELP. All this dash lights at the same time?

    Sometimes while driving I get all this lights at the same time. Thay stay like that for a few moments and go... and come back without aparent reason. Sometimes they blink... Does anyone know what is the problem? I wouldn''t like to get on fire. It is 1991 HDJ80 EU spec
  16. Streamer

    Help with roof rack in Denver/Kittredge area

    I have been looking for a Confer roof rack for my 40 for quite some time. I found one in Kittredge CO that needs some work, but looks like a great fit. Only trouble is that I’m in Wyoming and the seller doesn’t have a way to transport the rack. Is there anyone here that could help me out with...
  17. John Young

    bringing a 2007 HZJ105 'Missus White' to BC to stay... and a little plea for help

    Hi everyone. I'm actually in Langley awaiting the release of the 105 from the port. I'm stuggling just a bit with the import tech requirements, notably the daylight running lights. I'd really prefer not to cut into the harness to add the little black box and I've been told that it may simply...
  18. php74

    Help finding or cross reference Toyota 88320-27060 AC compressor

    This is for a 1990 Toyota lite ace 4wd petrol (3y) van. I know I’m technically not in the right section, but parts are closer to these trucks than anything else. I’ve tried all the jdm places, all the largest US parts departments, eBay, foreign Amazon. Any help appreciated!! Thx
  19. dfarley4504

    Help with tranny leak

    I’ll replace this seal going to the front driveshaft, but still leaks. Any tips on my next move?
  20. AUGuy

    Gonna sell the road queen, could use some help on pricing it

    Hey Everyone! I think I’m finally gonna sell the 80 in anticipation of the release of the 250 series. Was hoping to get some feedback on fair pricing given the current market. Scouring recent auction results in similar condition (but sometimes higher mileage) broadly range from $25-$35k. Any...
Back
Top Bottom