cylinders

All, You may have seen my other thread about the “heater hose” where I had a frozen coolant plug bolt on the head I had to drill out. Good news is I finally got it out today! Bad news is, when I reassembled everything, filled the radiator with water, I noticed the carburetor starting to fill...

Pair $100 shipped

Complete. $200 includes shipping to lower 48 states.

To those more knowledgeable and experienced, I’ve got 2f with a misfire on cylinders 1&2. I’ve been daily driving the truck since 2019, done a lot of work including a head rebuild in the last 5 years. I was driving a short distance around town last week and noticed the beginnings of a rough...

Sounds like a couple cylinders. Took all apart and checked plugs are tight and leads are on.could it be another issue? found this hose and don’t know where it goes I guess it vacuum? Second pic shows where it comes from

Have a set of restored masters, clutch and brake both. tin cups, master cylinder threaded plug ends were rezinc dipped with minor blemishes from years of use. masters were taken to metal honed 2 coats primer 3 coats paint. caps were taken apart cleaned repainted. have both styles of caps...

I have a leaking cylinder on my ’71 FJ40. I’ve looked for replacements but not a lot of luck yet. Anyone with some sources would be appreciated. I pulled the wheel off the Cruiser today and it looks like the right side cylinder is leaking ( what do y’all think? ) Is it possible or an option to...

So, I’ve replaced wheel cylinders in the past and never thought about them being handed or side specific. These days I always consult my FSM and it looks like maybe there is a spring in one side and not the other? Does that sound correct? Are my eyes deceiving me? If not, does that mean that...

Hey guys, I've been here for a long time and my old account has an email that is no longer in use so I can't get my password reset so on with a new account! Anyways, 2000 with 157,000ish miles... I've been chasing misfiring for a few months now. At this point spark plugs have been replaced...