air intake

2000 LC 166k While finishing up my alternator install I broke the very last screw I was putting back in - the air intake mounting screw nearest the firewall. Go figure. I got around to tapping it out the is weekend, and I ended up having to drill so I could rethread. I ordered new oem...

Recently I was checking on a squeaking pulley and pulled off the air intake to get more elbow room. Through an unfortunate series of events, I broke off the nipple that the EVAP hose connects to. See photos below. I tried gorilla glueing it back in place, which held and was air-tight, but it...

Hey all, I recently began to run into overheating issues on my 95 FZJ. Everything starts fine and maintains normal temp until about 30 minutes into driving in which the car's idle starts to slowly climb and the temperature starts to go up. I've put a new thermostat in and did a coolant flush...

I had to take this off my uncle's LX570 as he was in a state without the CARB restrictions. As I can't use it, if someone wants it, you can have it for FREE. The images are everything I have. I asked the shop to replace with OEM parts and put the AFE in a box. I am in the East Bay, SF...

As per another post in this forum, I previously had a Lexus ISF with its glorious NA 5.0l screamer of an engine. Miss that car. Anyway, I did a bit of work to the car, all the usual stuff including a tune. One of the things I did was replace the stock intake tube between the factory air box...

Came off my 1988 FJ62 that I am LS swapping. 265k miles 22250-61010. May fit some early FJ80s, not sure $125 plus shipping

ran into my first problem when wrenching on my new 80s series. I ordered a new OEM intake air hose kit and went to replace it and noticed this hose that went from the IAC to the intake hose seems nonstandard. Im usually good at finding replacement parts on this site combing through threads but...

82121-60343M - Wire Harness 1997 TLC replaced to install SC all clips are working, removed with high attention to detail $300 17881-66080 Air Intake Hose, less than 2 years old, less than 5000 miles $75 22250-66050 MAF 150k miles, working when removed less than 4 weeks ago. $125 53101-60130...

Looking for an air intake for a 14B-T intake manifold (not the manifold itself). Can be posted to Houston, TX. Addresses in Australia and Europe also available.

Hi all, I'm about to rebuild my original carb in my 1980 and I've got a lot of rust going on around the base and along the block/manifold. Any ideas on what could cause this type of corrosion and how to avoid that in the future? My air intake manifold rail had 3 out of the 5 fittings...

Looking for a horn and bracket for my resto-mod. Need the horn definitely….i can make a bracket if I need to. Please message me if you have one available. I plan to sandblast and powder coat, so I don’t need a unicorn part….just no structural rust, please.

Would also like the bracket if available.

This is a very specific one…1975-1976 Hot air intake insulator. This is specific to non-thermonuclear, one-piece exhaust manifolds. Great shape, just needs blast and cerakote for nice appearance. Too early for my truck else I’d install. $50 + shipping

Air intake purchasd from Marks off-road. I don’t know too much about it, as it is not a fit for my ‘65. I thought I’d be a bit more universal, and it wasn’t. the one inlet/outlet is plugged by a wood dowel by PO. I have purchased a better fit since. Included is the air filter. $250. Plus shipping.

I've installed a 2000 Tahoe in my 88, well it's still in the works. I've used a new but stock specifications radiator. Does anyone have ideas or suggestion on where to connect the throttle body coolant return line? I think on a stock Tahoe radiator there's a fitting on the radiator where it...

Broke vacuum line nipple on mine - part number is 1787550190

I`m looking for a Air intake Pipe without EGR for my LC 78 rebuild with a 1HD-FT 24V Engine The partnumber from Toyota: Pipe, Intake 17113-17040 This Part was normali installed in a HDJ80 without EGR. I Need shippment to Switzerland Thanks for Help

Hello all, I need advice on how to get an air intake tube so I can reinstall the old airbox so I can install a snorkel eventually. I currently have a cold air intake behind the battery on the left side of the engine bay (shown in the picture), I have the old OEM round airbox and am planning on...

Offroad Garage Fiberglass FJ Cruiser Air Intake System Snorkel. In new, never used condition and ordered directly from Off-Road Garage website. Includes all hardware - ready to install. Requires no drilling or modifications to body of your FJ, installs in place of outer pillar. Free shipping...

SoCal AFM also called a VAF or Air vane from a 1992. The hoses are in very good condition as well. Air Flow Meter including shipping USPS Priority Mail $145 Intake Hoses with center piece $75 ALSO ALMOST ALL EXTERNAL SENSORS AND PARTS FOR THE 3fe