1hd-ft

Hey guys! I have loved reading posts on this forum for years and it has answered so many of my questions! but this time I cannot find any info on this one. The short version of my question is: Would I be correct in assuming that the camshaft in the last images (with the recesses/notches in the...

If you had only those two options, which would you pick, and why? I'm currently living in Japan as a service member, and am about to buy a 1HD-FT Auto cruiser, due to how rare the manuals are. There are a couple 1HD-T 5-Speed's every now and then, and they're expensive. I want a manual, but...

I am getting conflicting information as to whether BEBs are an issue on 1HD-FT, and thus whether I should be considering replacing them on my 97 1HD-FT with 300,000 km on the clock. I just got the vehicle and do not know the history of the engine. However, it doesn't seem to make any unusual...

My new to me 1HD-FT shuts down somewhat rough, with the whole vehicle shuddering. I know that this is not uncommon on diesels, and my '96 1KZ-TE used to do same when I reset the ECU, but would go away after about 300-500 km as the engine ECU auto-tuned itself. Is there anything I can do on...

A little back story: I’m doing a diesel swap into a 97 collectors 80 Series. I’ve been refreshing the motor and rebuilding everything that can be rebuilt. I believe the motor is a UK spec. It has an AC bracket, but no compressor, no tensioner pulley, and only a two groove harmonic balancer...

Hi Folks, I'm stumped trying to figure out what this coolant hose and... thing? is in my new-to-me 1HD-FT powered 80 series. The hose is the one coming out the left side middle of the head (from the viewer's perspective, the driver side on this RHD truck), going to the aluminum thing, then over...

Hello, I just purchased 2 x 1995 Land Cruisers from Japan's Auto Auction (1HD-FT manufactured post 1995 July - 1998 I believe). Looking for parts /sources for parts: Things needed: - Timing Belt Kits x 2 - Alternator - Driver's seat - More to come in the near future as I dig more... Any/all...

Am running a 1996 80 series with 1HD-FT on Auto Gbox. I have removed my EGT and after a few months the car has been gutless and runs like there is no Turbo. Patched the boost hose to check for turbo boost and it is approx 0.9 bar. I suspect might have messed up the hose configurations...

A lot of you have been asking me to post some details on my build, so here i go. I also wanted to start this thread to keep track of all the things im doing to the truck and help motivate me to see the project through. And i will try to provide write ups of the unique mods for future reference...

I'd like to have my 1HD-FT engine tested when I have it shipped back from Cape Town to the UK in the next few weeks, as I'm looking to sell it. There's a little black smoke but nothing crazy. It's done about 190k miles. Can anyone suggest somewhere in the UK where I could get it compression...

Just think that is someone will go my way: Swapping 1FZ-F (carburetor version) to 1HD-FT I did this swap as friend of mine decided to do a long range to Nepal and Thailand from Russia and decided that he needs brand new engine for that trip and sold me a good runner for a dime. The price for...

Starting teardown/rebuild on a 1Hd-FT engine in a 1995 HDJ81V. I’ll try to keep this thread updated with my progress and answer any questions I can for other members considering starting the same process - though I’m definitely a newbie at engine rebuilds. Today I: -Built a ramp to get the...

Upgraded to aftermarket turbo when doing the motor swap on my HJ75. 1HD-FT Used OEM Turbo, This turbo was in good condition, but not sure on exact mileage. $350

Hey I have been offered a used HDJ80 that has driven 605,000 km, but there is no knowledge of engine maintenance. what do you guys think ?.. is there a way to check whether the big end bearings are ok, done or killed = rebuild of the 1HD-FT ?.. Br

Hi all, I have been told by a reputable diesel tech that tunes alot of toyota diesel engines that there is some sort of device , i believe electrical, that limits the power output on the 1HD-FT engines in first and second gear. Me being a DIY kind of guy want to disable or remove this myself...

Hi guys, simple question that I cannot find an answer for. I have the 1hd-t engine in my car and have an ft pump sitting in the garage shelf. It needs to be taken to the shop and tuned back to specs. My question is: are there any differences between the two, can they be interchanged and if yes...

I asked my diesel shop who is very reputable when it comes to toyota diesel tuning a quote to get my 1HD-FT injectors checked and rebuilt if necesarry. He told me it is better to convert my 2-stage injectors to single-stage injectors, better low down performance he said. I searched on Mud and...

Plunger stroke Europe 1.52 - 1.58 mm (0.0598 - 0.0622 in.) Australia 1.37 - 1.43 mm 10.0539 - 0.0563 in. Why it is different ? Rebuilt 1HD-ft (euro) who is going in to my HDJ 80 -91.(1HD-T) . Removed the egr and use 1HD-T injectionpump . Do i use Australia plunger stroke or Euro ?

Hello, I've searched and searched without any luck. Long story short, I'm wrapping up my 1HD-FT engine refresh. Need the specs for the correct amount of pressure the fuel nozzles should have. The FSM does not show what pressure it should be. It mentions a start to spray pressure of 2000+ PSI...

Hello, I have recently joined this forum and have enjoyed reading about all the awesome builds and the tons of expert info available here. I have decided to take the plunge on an 80 series. I'm looking for an LX 450 in gold, silver, or white, maybe green, but no black (sorry). Looking for a...