WD40 IS a WATER DISPLACEMENT !!
I Use BG carb cleaner in 1/2hr between squirts , when you see it raise , it's getting ready , remove the mass with blades first.
VT
My Porn Shots I'll be listing in DEC .
3 Donor's of BJ's 60 with 5 speeds .
So 2 spare trans & engines .
Red , Blue & Green are BJ60s , Blue has given It's soul and trans for a rework turbo-ed 3B 5Speed .
Most parts already bought and reworked , but I got a wake up life 4 years ago .
This...
Just use a 12 V battery & connect it directly with good jumper wires , If it works then You have a truck wiring undersize bug and will need proper relaying for this to work. Start-up power is great
Levron , 18 post .
Rust ,, CANNOT be REPAIRED .
Buy a BJ like you did, Buy an FJ from Cali . Mix the Two , Migrate , Landcruiser porn .
You are wasting your efforts.
Dang.
If you have never touched a dry FJ . your un-knowing.
H55F with Diesel only .
Now your talking , the rest is a dream for the amount spent over saved.
trany 1500min clutch & bits say 2000. \For a .5 OD factor ?
I don't see it.
Your well on your way if you have a diesel & governor . The AMP is for AC & engine control of fast idle or so it won't stall due to extra load from the compressor. There mid 80's euro / volvo had an idle compensated for when the compressor cut in, but because euro carbs / fuel injection was...
I checked the manuals . dusty books , good to see the old stuff, I can spell most of those words.
It is to be mounted internally in the fins and then the end is to be mounted 1/2 way the way on the tubes flow , so mid flow. Now MY Manuals have huge print to use lead foil and cork tape for...
Let me look into this again , I believe it was defiantly inside the evap and on a tube , but where in proximity of the expansion valve ,that is where i need to check. My manuals I will see later , Im mobile & should be back tonight .
Correct , and there is a micro adjustments to trim out the...
Well any type of switch I have seen on mine were (now Im not looking at it, but from last year memory ) they were max limiters , so if it got over pressure , then it would open a circuit(or close, didn't look into it YET) I'll have a look @ my evaporator tomorrow and update my thinking before I...
ABS sensor if it has a magnet , this impulse type won't have enough juice / power for the amp to see it. If the sensor (abs) hasn't got a magnet , then that's a hall effect , and it will never work , due to it must be driven.
Since your trying to bypass the control of this , why not use a temp...
TacDoc, What truck , engine , body & model do you have that your looking for ?
Fill out your profile !!
I will be having a 60 FJ 2F from a 1983 model coming out. I will be installing a BJ one in.
Im changing the complete unit due to FJ is backwards to BJ ball mounting & clearance , I believe...
Nice looking rig, whats the fuel mileage for one of those ?
I figure when the fuel hit's 4.80 per gal / 1.95 L all these gas gusslers will be priced just to move them.
You won't see any BS government crap {class 4 clunkers} , it will just go the way of the 80's.
lcwizard Math looks correct...
I bought a manual book for trans and many more , then downloaded a bunch more and also purchased a parts system . As with tools , I used pullers and presses that you just can't put a number on it and buy them at any No-Zone oil filer store.
I myself would really think about how to proceed from...
Use your Mind !!!
All Brgs are precision and CANNOT be altered , clean the input (male ) so it slips on with constant light force uninstalled.
Never force , Draw with bolts, ETC, best bet is your friction disc is out of alignment , or..
YES very tight , I just did mine, a 6201 pilot brg ...
Where is over There ? That must waste / messy & be a pain.
Funnel to a long hose , then wire the funnel to the right rear window level ,hose in tranny fill, catch pan under trans , fill funnel , Gravity works with a Tea or a beer break. look in manual for amount and add a litre for...