Search results for query: *

Forum search Google search

  1. 100sExp

    8th Annual 100s in the Hills *July 12-17 Silverton, Colorado*

    We had an amazing time at our first 100s in the Hills and hope to do it again. Enjoy some of the sights, captured from above.
  2. 100sExp

    What's burning???

    bump
  3. 100sExp

    Brake Recommendations

    bump
  4. 100sExp

    What's burning???

    Hey guys, a few weeks ago I noticed some smoke coming from the left/rear wheel area of my 100 series, after a short drive in town. It kind of smelled like burning grease. I visually inspected all around the area but didn't see anything that seemed out of place or any leaking fluids. Since this...
  5. 100sExp

    Brake Recommendations

    Hey all, my brake pads are wearing rather quickly since adding all this extra weight and larger tires to my 100 series. I'm curious what you guys are using for pads and rotors, OEM or is there something better? Hello sun by 100sExp posted Nov 11, 2016 at 10:01 AM
  6. 100sExp

    Building an '03 100

    It's a 18" Rigid that they custom make for the Slee.
  7. 100sExp

    Building an '03 100

    Pinnacles by 100sExp posted Nov 11, 2016 at 10:01 AM I went with a BajaRack and the CVT Shasta. There's a basket in the front of rack that I keep MaxTrax, shovel, axe, etc. BTW, love the NV wheels, just wish they came in 16".
  8. 100sExp

    Weird front end behavior...since lift

    Thank you everyone for the help, what an amazing resource this group is for owners of these vehicles. As per the multiple recommendations, I had the front torsion bars cranked down a bit (lowering ride height and allowing more droop), rebalanced tires and realigned suspension (spec sheet below)...
  9. 100sExp

    Weird front end behavior...since lift

    Yes, this is a photo of my truck. Sorry I forgot to mention that it also has Nitro UCA's and was aligned post lift. I do not know the post lift alignment specs. The reason the spacers a wider in the front is by the recommendation of someone (can't remember who) at Nitro Gear & Axle as the "magic...
  10. 100sExp

    Weird front end behavior...since lift

    Hey group, looking for some help here. Ever since I've lifted my truck it's had some strange things happening in the front end. When I accelerate (worse at slow speeds or from a stop) the front end wanders/shimmies significantly. I can feel power alternating from one side to the other in the...
  11. 100sExp

    CV axle issues...help please

    Thanks everyone for the help with this costly error. OEM CV's are going back in it now. On the bench, the OEM CV's were measured to allow 40° before binding, aftermarket only 24°. Huge difference. Hopefully no other issues after the swap...lesson learned. Replacing "stock replacement" CV's with...
  12. 100sExp

    CV axle issues...help please

    Thanks guys for the info. I'm not sure if my mechanic kept the old ones. He said they were pretty worn. Rcmay, do you have a link for the rebuilt OEM option, in case my old ones are still around?
  13. 100sExp

    CV axle issues...help please

    Hey Group, After a torn boot, I've had my OEM CV's swapped with some aftermarket "stock replacement" axles and am experiencing on throttle vibrations. My mechanic suspects that the new CV's somehow are not able to handle the angle of misalignment when on throttle weight transfer causes front...
  14. 100sExp

    Front CV Axle rattling, grinding, interference issue...please help

    Thank you guys for all the feedback. Based upon what I've read, my assumption is that aftermarket axles were used and that is what's causing the problem. I paid $140 each for them, which is much lower than the $500+ Jemsec has said that the OEM ones cost. The front bearings were recently...
  15. 100sExp

    Front CV Axle rattling, grinding, interference issue...please help

    They're stock replacement CV's and yes, I am running the Slee Diff Drop.
  16. 100sExp

    Front CV Axle rattling, grinding, interference issue...please help

    Over the summer, I did some major (but common) modifications to my 100s. One of the changes was to do a 2.5" heavy load lift. The lift consists of Nitro Gear UCA's, Old Man Emu torsions and springs, Icon 2.5 stage II RR shocks. The upgrade has been really nice but I've now run into a problem and...
  17. 100sExp

    Stock 16" wheels interfering with Icon suspension... help please

    Sorry it took me so long to give an update here. Just to give some closure to the topic and help anyone else doing a similar install, I was finally able to get the wheels/tires to fit properly. The first problem was that the rear remote reservoirs were indeed mounted in the wrong location. I had...
  18. 100sExp

    Seeking scale drawings of 100-series

    I know this was a loooooong time ago but were you ever able to make a 100 series body for your SCX10? I'd love to get one but have nowhere near the patience to design and build myself.
  19. 100sExp

    Stock 16" wheels interfering with Icon suspension... help please

    Thanks guys for the input! Yeah, I think I'm going to start with relocating the rear reservoirs then see where I'm at. To answer your question Hayes, from what I recall the UCA's were about 1/4" from the 295/75-16's on stock wheels, when drooped out on a lift.
  20. 100sExp

    Stock 16" wheels interfering with Icon suspension... help please

Back
Top Bottom