Search results for query: *

Forum search Google search

  1. KlickitatPhil

    Local Diesel Prices

    That's only slightly more expensive than the prices in Goldendale! It's almost worth it to travel to the reservation in the Yakama Nation to get diesel for $4.79 per gallon!
  2. KlickitatPhil

    2H + H55F Removal Help

    Got the dang thing off, it wasn't that bad once I removed a tiny bolt on the front left of the bellhousing cover plate that was overlooked. It helps to sleep on it! My suspicion that the clutch was fine but the pilot bearing was shot turned out to be true. The new clutch assembly feels a little...
  3. KlickitatPhil

    2H + H55F Removal Help

    You know, I was exploring the lower elevation ranges with the engine yesterday. Today I'll try with the engine stuffed up in there some more. The shifter protrusion at the top is not yet an issue, but I was trying with the whole outfit hanging below the shifter hole in the tunnel. The only...
  4. KlickitatPhil

    2H + H55F Removal Help

    Good evening, I'm not quite halfway through replacing the clutch on my '86 HJ60. Everything is disconnected and all of the bolts are out. The engine is supported by a floor jack, and the transmission is supported by a transmission jack. After trying for several hours today, I've only managed to...
  5. KlickitatPhil

    2H loping idle?

    It hasn't had a lopey idle since I originally posted this thread. In hindsight, I think I tried starting that day without glowing for laughs, started right up but I was distracted by putting my kayak on the roof and forgot all about what I had done to the point of posting on Mud about it.
  6. KlickitatPhil

    2H loping idle?

    Howdy! I took my 2H HJ60 and my dog out for a grocery run to town today and noticed something unusual while warming up. Right off the bat, the idle was loping. No A/C, no lights on, nothing unusual. It was a rhythmic pulse, and it wasn't threatening to stall or anything, but this is a new...
  7. KlickitatPhil

    Local Diesel Prices

    About $6.50/gallon around here. I was at Walmart the other day and they had canola (rapeseed) oil for just over $7 per gallon. I was tempted to buy a few gallons just to see how the 2H ran on the stuff.
  8. KlickitatPhil

    2H glow and start issue

    The first replacement glow plugs I tried in my rig were the cheapies from SOR. They did not work well at all - worse than the set with one confirmed bad plug that were already in there. To make matters worse, one of the tips broke off in the hole while extracting the cheap ones. I had to crank...
  9. KlickitatPhil

    2H with high oil pressure

    Installing the extended valve took me half an hour. A shortened 22mm wrench gets the cover screw off, and a rag stuffed up there and running the engine for a few seconds got the old valve out. About three tablespoons of oil also came out as well, so be prepared for that. The problem came to my...
  10. KlickitatPhil

    2H oil pressure and water temperature holes

    It turns out I was capable of figuring this one out without the Internet after all. No less, I'll post the highlights here for the next guy to find. In the picture below, the oil and water ports are circled in red and blue respectively: To connect the Auto Meter 2392, a few adapters are...
  11. KlickitatPhil

    2H oil pressure and water temperature holes

    Updates already! The 8mm allen head bolt came off, it is indeed for water. Where oh where can an oil port be found...
  12. KlickitatPhil

    2H oil pressure and water temperature holes

    Good afternoon, I'm installing a mechanical water temperature and oil pressure gauge set in my '86 HJ60. Are the two holes pictured below for oil pressure (circled in black) and water temperature (circled in blue)? This picture is looking at the engine from the right hand side of the engine...
  13. KlickitatPhil

    2H Exhaust Downpipe Studs

    Those parts look great, Matt! If I were to do it over again it would have been a real benefit to have the torx tips like your studs do. For those looking for closure in the future, these parts all worked for a 1986 HJ60: Studs: Toyota # 9011610087 Nuts: Toyota # 9008017187 Gasket: Toyota #...
  14. KlickitatPhil

    2H Exhaust Downpipe Studs

    I'm not sure how reputable this website is, but this kit seems to imply that a stud for the 3B will work for the 2H as well. Is that true? I ordered 9011610087 earlier this evening from Gladstone Toyota on a hunch with the aforementioned supporting evidence.
  15. KlickitatPhil

    2H Exhaust Downpipe Studs

    Howdy! I was replacing the exhaust downpipe donut gasket today on my 1986 HJ60 with the 2H engine. I was able to find the gasket and new nuts for it from Toyota in the states, but I couldn't find the part number for the studs. One of the old studs is not in great shape and came out in one piece...
  16. KlickitatPhil

    Half-a-crank warm starting secrets?

    I'll have to try that, thanks!
  17. KlickitatPhil

    Half-a-crank warm starting secrets?

    Howdy! Are there any methods or tricks to get a 2H to fire off immediately when warm? I'm talking about the starts where you barely bump the key and she's purring. Those half-crank starts are really impressive! I've experienced a few of them with my rig, but not very often. Lately it has been...
  18. KlickitatPhil

    Real Time help Needed! Glow Plug tip in Cylinder Head

    Glad to find this thread! I had the tip of a cheap Taiwanese glow plug get stuck in the hole today on my '86 HJ60. I first tried cranking the engine with no busbar, but it didn't budge and the engine was too cold to make any noise without glow. Tried again with the busbar installed and the...
  19. KlickitatPhil

    2H smoke/steam characteristics in cold weather

    Howdy! I've got a 1987 2H diesel in my HJ60 Cruiser. This isn't my first diesel by a long shot, but I've noticed an interesting characteristic about the warmup cycle. On cold mornings (below freezing), it produces the expected gray smoke for thirty seconds or so. It then clears up briefly, then...
Back
Top Bottom