Thanks for the pics. Do you think it'll be a problem down the road with the cable hitting the edge where it exits the tube/sleeve/end? It looks like a wear point...
I have one in my 60... I'm thinking about going for it with my 2F FJ40.... I did the 60 piecemeal, never again. Cam for sure if I do it again (unless I stumble on some sale to beat all sales (not likely)
Well after upping the idle I was not seeing the same level of the problem. I can't say it is gone but it is greatly reduced. Is that because of the idle speed, more learning time or...? I don't know. Holley tech support requested I run a log when it is happening but it didn't so I didn't.
I blew...
Pretty sure it is fuel delivery. Filters are new a week ago. The truck was running fine prior, not an old tank. And it is not dropping out, it it surging up ..
So I'm out wheeling today for the first time with the Sniper. Low speed low rpm rock crawling mostly. Low geared...
I'm getting a very pronounced on-off-on surging issue, more so under load... it is almost as if I'm stepping on the throttle and off the throttle and on the throttle and off the...
Frame mounted fuel pump. LS style filter regulator next to it on the frame.
It was a very low energy faint starting to run feeling that just faded away.
The starter cranks fine.
I've never heard any thing like it.
Took it for its first drive of any significance today... about 10 minutes or so on local streets. Stopped to get gas and when I tried to restart it it really didn't want to start... I let it sit for a few minutes and then it very reluctantly, very slowly came up to idle.
Thoughts?
Well how about that.... I had installed the adapter a hundred eighty degrees out so that the throttle blades would not open all the way! I ttook it all apart swapped around and now I'm in the process of adjusting cable and pedal again but it looks like I'm on the right track now.
Thanks all...
(EDIT: See a couple of posts down... this was not necessary)
The plan is (more or less) to replace the blue cable path with the dotted orange path by adding a bracket indicated by the solid orange line with a new mounting hole at the end.
(EDIT: See a couple of posts down... this was not necessary)
Yes, plan is to build a little "extension plate" to be able to mount the cable connector farther away from the pivot. It'll be a little trial and error to get a satisfactory "length" to that extension.