Search results for query: *

Forum search Google search

  1. gdctaco

    6bt cummins NV4500 1996 LX450 swap

    is the fuel shutoff solenoid fully opened. try adjusting the nut on the throw rod, or push it by hand and see if the idle improves
  2. gdctaco

    1993 FZJ80 Cummins 5.9 12v Swap

    Any luck getting it sorted? I have the HGM a442 controller so its different but, in diagnostic mode it acts like you describe, just a thought as I have no experience with the microsquirt. I ended up getting the dakota digital tach hooked up to the alternator after the first one failed. It runs a...
  3. gdctaco

    Builds another cummins swap thread/build thread

    blocked mine when installed the fan
  4. gdctaco

    Builds another cummins swap thread/build thread

    i drilled 2 small holes in my tstat at 12 an 6 instead of buying a cooler one
  5. gdctaco

    Builds another cummins swap thread/build thread

    yup to the red like cnorm.. the mech fan pulls way more air, you can feel it in front of the grill
  6. gdctaco

    Builds another cummins swap thread/build thread

    ya, it would get hot, especially slow trails with AC on
  7. gdctaco

    Builds another cummins swap thread/build thread

    still going, switched the efans out for the cummins clutch fan, pulls was more air.
  8. gdctaco

    Builds Bunny: 40th Anniversary FZJ80 / 6BT / NV4500 build

    True and it's just an airbox, easy enough to make up something else
  9. gdctaco

    Builds Bunny: 40th Anniversary FZJ80 / 6BT / NV4500 build

    The airbox is custom diesel adapters piece, if you want one I'll send you one i have
  10. gdctaco

    My Cummins 6BT Story

    ya please post your findings, a lower stall would really liven the truck up
  11. gdctaco

    Backhoe vs ARB/LC80

    That looks like a cat420 to me and should way close to 17000 pounds. The way he reacts, makes me think he knows he hit the cruiser. The way he pauses seems like he's looking for damage, but from the cab he'd never see that little dent, maybe he figures he didn't hit it. I've seen the damage...
  12. gdctaco

    Builds Cummins 6bt/nv4500 build

    that unused sensor if I remember right is a 1 1/16", 1/4" npt. it's a pain with a wrench or you'll need a really deep socket and it's much easier from the wheel well with a bunch of extensions. The best way is to break off the plastic sensor part just above the formed metal, then a regular...
  13. gdctaco

    Builds Cummins 6bt/nv4500 build

    Thats the one that broke on me 7 hours from home, got it fixed at a flying J. Lost 8 quarts of oil :D
  14. gdctaco

    Duiser off-road and diesel adaptors HELP!!!

    If you paid with visa or I believe paypal works the same, start a claim against him. That'll do 2 things first you have the option of getting a refund cause he wont send you anything, second it'll really motivate him when he knows he's not gonna get paid and he might actually send the kit.
  15. gdctaco

    Builds another cummins swap thread/build thread

    on a recent trip I had an unused oil pressure sensor leak and lost about 8 litres of oil while driving around 70MPH before I noticed, got it fixed at a Flying J truck stop. So we continued the trip doing another 3000 miles. I pulled some oil and sent it off for analysis for peace of mind and it...
  16. gdctaco

    Howling/Buzzing noise help

    I had this issue when I first got my truck too. I did the methods described above, it was the front diff input bearing going bad and allowing in and out movement. so when you remove the driveshafts grab the diff input flanges and push pull on them there should be no movement. edit to add: the PO...
  17. gdctaco

    Official 37" and up picture thread

    Swapped the XML 325/85R16 for general grabber X3 M/T 37x12.50r17, took about 40 pounds off each corner, truck handles and drives much nicer
  18. gdctaco

    Events/Trails road trip Toronto to New Orleans in the cummins swapped 80

    Drove down to Jean Lafitte
  19. gdctaco

    Horrific metallic scraping noise while running

    Open the ispection cover on the bellhousing, there might be something in there that shouldn't be
  20. gdctaco

    Events/Trails road trip Toronto to New Orleans in the cummins swapped 80

    Wandered around today, got some diabeetus. Tonight is party at absynth house
Back
Top Bottom