Search results for query: *

Forum search Google search

  1. H

    New Front Runner Rack Mounting System for 100 Series...

    Hey, I ordered it in April 2019. Its only sold in South Africa but not listed on their website. You will not find it anywhere else. You will have to send a query and a technical rep will get in touch with you.
  2. H

    AC Inoperable, collective wisdom of mud help

    @2001LC, Thanks for the feedback. So I'll update you on the OAT readout.. just like you mentioned, I went mad and wiggled and smacked both LH and RH JBs and the OAT read is perfect now, just miraculously. But I have a bigger issue now which entails taking the whole dash apart.. the dreaded...
  3. H

    AC Inoperable, collective wisdom of mud help

    @2001LC, bumping on an old thread. I am having the exact same issue as your case, bad windshield install history + sunroof drains blocked. Etc. Somehow this issue had happened after I thought the issues were fixed when the car was taken for a pressure wash. Though everything seems dry. Just want...
  4. H

    New Front Runner Rack Mounting System for 100 Series...

    Yes, the reason for the cutting the slat is because of the mounting point to the foot rails. The slat was not required. I ordered the extra length extension through Feontrunner South africa. Reference was RRSP4SL1 length 721mm 4 slat joining rack side profile.
  5. H

    Master Cylinder Rebuild - DIY

    I timed the pump this morning to 29 seconds
  6. H

    Master Cylinder Rebuild - DIY

    @2001LC thanks for replying to my post. I noticed the delay when I put the car on a Cardiff with someone behind the wheel, put it in drive and the step on the brakes while I watch. I've had the calipers all rebuild with new seal kits, and changed out the rear caliper pins and boots as well no so...
  7. H

    Master Cylinder Rebuild - DIY

    Hi, guys, Firstly I'd like to thank Skidoo for this write and all the members who've contributed to this post. So I have a 2007 LC100 and I had a complete Master cylinder assy replacement 3years back when I got the vehicle (PO had really no sense of PM or any maintenance at all.) Just 2 weeks...
  8. H

    Brake issues - Help!!

    So guys, update, there are no codes, not with Techstream, and not with Launch. I did try and get some bleeding done with Techstream over the weekend and got a bunch of air out from the LHS Front. But still have a very soft pedal. I also went out on a gravel road and hit the ABS a couple of times...
  9. H

    Brake issues - Help!!

    Hi Guys, I have 2007 JDM 100 series without VSC. I replaced the whole Booster assembly about 10000 miles ago and brakes have been fine until the recent past where I've started experiencing 2 types of intermittent symptoms. 1. Brake pedal goes in when braking and no braking power.. second pump...
  10. H

    New Front Runner Rack Mounting System for 100 Series...

    Hi, I have a full length 2nd gen FR rack. I have modified the rack to allow sunroof access. And the reason for going full length was to mount a 2.5m side awning. See pics attached. The wind noise is nearly noticeable, though I wouldn't have a benchmark standard rack to compare to.
  11. H

    Torque Converter question

    Hi Guys, I had a question on torque converters. Has anyone attempted to fit a torque converter off an early 100series diesel (1HD-FTE with A442F) into an 80 series with a 1HD-FT with a442F. the part numbers differ though there are no physical differences looking at the parts. Splines match...
  12. H

    Noisy Injector Pump

    There's an access cover for accessing the fuel pickup though you'll have to peel back the carpet under the rear seats. Have you ever checked the strainer that sits inside the ip under the fuel cut solenoid?
  13. H

    Noisy Injector Pump

    Thanks bcr4619, I'll try that tomorrow and see what happens.
  14. H

    Noisy Injector Pump

    Oops. Sorry ForealBoreal. When you say died, what exactly happened?? I've checked all the fuel lines and changed and tightened the filter. No joy.
  15. H

    Noisy Injector Pump

    Dear Members, I have a 1997 JDM HDJ81V with a 1HD-FT engine. Recently I've noticed a high pitch noise from the injector pump which is heard when the engine warms up. When I pump the lift pump a few times it disappears for a few seconds and comes back. This only happened after I put in a dose...
  16. H

    Dancing Voltmeter Needle

    Thanks, I'll check that out. I second your opinion as there was a leakage from the windscreen before I bought the rig that had done some damage to the A/C computer which I had to replace. Thanks, will update on what happens.
  17. H

    Dancing Voltmeter Needle

    Thanks Pin_Head, I will try this over the weekend and post results. One very important factor I forgot is that with indicators left or right the above happens, but if I flick the hazards, nothing happens.. they work perfect!! Does that shift the blame to something else?
  18. H

    Dancing Voltmeter Needle

    Hi Members, I've noticed this issue since i bought the rig a few years back and never bothered me until its reached a point where i've troubleshooted most of the other issues on the rig, and now this one keeps bugging me. The rig is a '97 JDM HDJ81V with a 1HD-FT and auto A442F. I've tried to...
  19. H

    HDJ81 1HD-T BEB replaced

    Dear members, I'm replacing the BEB's on my 97 HDJ81 1HD-FT. Have been hearing a knocking sound thats getting gradually louder in the bottom half of the engine. Tried to use a stethoscope and noted nothing in the head, injectors are all normal, but the moment i put it around the sump and the...
  20. H

    Low oil pressure on a 1HD-FT

    Hey guys, Thanks for the advice. I will hook up a mechanical gauge and post the results. Hopefully work on it over the long weekend ahead. Have a great Easter everyone.
Back
Top Bottom