Search results for query: *

Forum search Google search

  1. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    The first time I just removed the entire ISC from the Intake, so I could use better leverage on the screws. After breaking that initial torque they are easily removed while on the engine. I also changed the screws to Allen head screws to make it easier. The only thing thats in the way was the...
  2. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    Took the dive on a set of 16x8 KMC XD301s. 108mm CB, 4.5 BS, 0mm Off-set. Now saving up for some 35x12.5 General X3s. Really need to get off the KM2s after 6yrs. :p
  3. TheLoyale

    Wheel Options for '92 FJ80?

    Well, I took the dive and did it. Instead of running genuine Toyota wheels I got some 16x8 KMC XD301 Turbines. 108mm CB, 4.5" BS 0mm Offset. $499 shipped kinda made my mind up. Jon, I was looking at getting a set of the standard '93+ cruiser wheels but, mostly what I was finding on fleebay...
  4. TheLoyale

    Wheel Options for '92 FJ80?

    2ELO, Indeed those are the wheels I was looking at. Thanks for mentioning the wheel spacers, it looks good having the wheels line up with the end of the flare vs being sunken in. Golgo, thank you for the clarification. I know this topic has probably been cover to the moon and back but, most of...
  5. TheLoyale

    Wheel Options for '92 FJ80?

    Alright, looking to get off the SR5 wheels wrapped in 33s and looking for 16" options. Been looking on ebay for Toyota 6x5.5 wheels and found a decent set for a '96-02 4-Runner although I am wondering if these are gonna be an issue. 1. After some reading on a Tacoma board they are saying the...
  6. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    Got the ebay ISC and a bunch of HPS hoses. So I put my ISC in all hooked all the coolant hoses up, fired it up and it ran different, no more lofting, but extreme low idle and almost won't recover RPM after a little rev (Ran it for about 10min just to see if it needed to adjust, shut off and...
  7. TheLoyale

    What do you think about this oil pressure?

    My '92 3F-E sits there kinda in the middle as well and close to the bottom at hot idle. I'm running Amsoil Signature 10w-30 with a Amsoil Filter. The gauge has always read around that PSI for the 6yrs I've owned the truck.
  8. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    I snagged a supposed "Good working" ISC off ebay, waiting to get it and pop it in. On another note, I am looking at getting 35x12.5x15 General Grabber X3s soon. Been comparing some type options, and I was gonna run the KM2s just a size bigger, but figured I'd give General's new tire a try...
  9. TheLoyale

    3F-E Idle Speed Controller, anyone have a lead?

    I removed the ISC today and tested is per FSM, Resistance checks out at around 20ohm (Spec is 10-30) but the voltage test came back that the armature is weak. Applying voltage to B1 - B2 while grounding S1 - S2 - S3 -S4 -S1 in sequence for closed position and S4 - S3 - S2 - S1 - S4 for open, the...
  10. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    TPS Checks out to the FSM, so I removed the ISC and tested it per FSM, and when voltage is applied, it does not move In/Out (You do feel a little tick) So I removed the unit from the armature and spun it buy hand, turns freely in and out. I'm under the impression that the magnet is weak/dying...
  11. TheLoyale

    3F-E Idle Speed Controller, anyone have a lead?

    Been trying to figure out why the ole' 3F-E doesn't like to idle in the -0 temps, and I think I've narrowed it down to the ISC. That being said, I've located the ISC Valve on a few Toyota part sites for between $400-$600. But am having a hard time locating the gasket which goes between the ISC...
  12. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    Interesting, I've cleaned the AFM the best I could last spring. What would be the best way to make sure the flap inside is free? I have also considered the idea that the Idle Speed Control is causing this abnormality. Once you take the motor off of idle, it runs fine. A new ISC is around $560 Lol!
  13. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    Another interesting day in the Life of 3F-Eing. Go to move the truck so I can blow out the driveway (-15 deg F) start it up, idles low and rough so I give it a little gas and it starts to idle up fine, let it run for a good 15min or so as I get the blowers running and such. Truck is pretty warm...
  14. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    So after having the EFI relay fail on me while driving (The ole' 80 coasts pretty well in Neutral at 65mph) I am going to run a non factory 4 pin relay, in hope that it won't fail (Fail as quick) I've read enough of how this issue seems to be the thing that pleages 3F-Es and according to...
  15. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    Rolled over 184k today. Nothing going on, other than my new EFI relay got stuck once. Tapped it and its been working fine now :/ On that topic, how hot do these EFI relays usually get? I've noticed on my new one, the terminal tabs are starting to discolor along with the plastic WTF? Other than...
  16. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    I've been looking at that. I run Amsoil in everything and anything anyway lol. Eastwood offers some Rust encapsulators and such as well.
  17. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    Also to back track a little bit, here is the video of the Super-44 muffler. Also, last month I have the pleasure of pulling out my buddies Forester from a pretty hairy mud pit. Landcruiser did pretty good even without lockers, although I did get stuck by a log in the mud. just couldn't get the...
  18. TheLoyale

    My '92 Landcruiser: Safariwagon-II

    Haven't done much to the ole' 80. Went all thru winter and spring with no issues! I will be doing brakes on it soon, and last weekend I changed out the driver side axle seal. Original KOYO bearing looked fine and had no signs of wear, so I left it. New National seal. Tomorrow, we'll be taking...
  19. TheLoyale

    '92 80-Series: Magnetic Shift Lock clicks with Turn Signals?

    I do have LED Brake bulbs for the brakes. And now that you say that, that is about when I noticed it. Guess I will add a Diode in line like you said and see if that corrects it. Thanks again Jon! -Tom
  20. TheLoyale

    '92 80-Series: Magnetic Shift Lock clicks with Turn Signals?

    So recently I have noticed. While the truck is in park, If you turn on the 4-ways or the Turn signals; the magnetic gear shift lock clicks along with the with them. I've look at some of the wiring for the lock, but everything looks normal, unmolested and such. Any ideas why the turn signals...
Back
Top Bottom