Any decent parts in this area are either stupidly expensive and stolen or so old they
Any decent parts in this area are either stupidly expensive and stolen or so old they are seized together.
So the option that has come up here is to machine the gear off.
It is the largest front gear on the...
Thanks for the replies so far.
Dan, thanks for the offer- if i am still stuck then i will give you a shout!
Do both the 151 gear boxes have the same bell (clutch) housing bolt pattern?
Could it mess my front drive shaft as well it all being longer?
Thanks for the help, the more info i have...
Thanks for the replies so far.
Both the 4 speed boxes have the short output and no adaptor- so they wont work.
The gearbox from a 1hz is a possibility, someone here is talking about it. I have a few more questions;
Is it any gearbox from a 1hz? Are they all h55s?
Will my transfer case fit...
Hi guys, i have a pretty major problem on my hj60. The bottom half of my gearbox has been destroyed. The lower front bearing went, which then caused the lower cogs to strip. I think this is the counter shaft?
I'm currently in Northern Mozambique, and the local town (nampula) has quite a...
Yea, I wouldn't want to have a car with a stretch like that! The metal is the same grade as the original frame - in what I think is one of the weakest parts!
Thanks for the info about the fuses - that does seem to make sense.
Awesome!
This maybe true... but I have no idea where to buy 24v fuses here!
'cruiser has been back on the road for 2-3 weeks now, it was 4 days work.
Now in Uganda!
For me it isn't just literally driving the car away, but also preventing people from getting into the car in the first place. I have basically been living out of the car for the last 7 months - so there is some valuable stuff inside.
Now in Uganda after having to take out all the electrics due to my rear light wire burning out (for some reason the fuse didn't blow!
Here is my dash out picture..
Have a look at this stretched Kenya Safari '60. Cool eh!
until you see how it is stretched!
Pure copper pipes and copper alloy pipes are two different things. Copper alloy is also know as Kuniffer or cupra-knikol. (sorry can't remember how to spell either of these words!) It will not corrode. Its more of a Gold colour rather than the traditional copper colour.
BMW use it to make...
Security is quite a big thing for me in Africa - and Old toyota skeleton keys are easy to come by (that open and start most old Toyota's.
I decided disconnect the door locks and install a remote central locking. So the key holes are still there, but when you turn the key the barrel just spins...
Hi Bennie, yes still in Nairobi just sorting out a small brake issue plus a few other things. Will be leaving for lake vicotira in the next couple of days, then into Uganda and Rwanda.
Noticed you are on Facebook - that is the easiest place to find out where we are.
Hope to see you in ZA for...
Thanks for the tips, I adjusted the rear brakes which made things a little better - but still not right so I have bought myself a new master cylinder. Was only $40! New part (though not genuine) but seams decent. I will then rebuild the old one as a spare. Good old Africa
Does anyone know if late master cylinders with the bigger reserve fit early smaller reserve models? Or do Hilux ones fit? Just want to check as I may not have all the options I want!
Yea i did bleed the valve, but will check the rear brakes again.
It seams like it could be a problem with the master cylinder - hope I can find a rebuilt kit here!
I will check both - I think I might rebuild the master cylinder as a matter of course.
I have the weight balance front rear thing- could a problem have developed with this? It doesn't leak and the brakes used to be OK
So my overland HJ60 is suffering from some brake issues...
Most of the time the brakes are OK (junctions, roundabouts etc), but if you need to brake very quickly I feel like the pedal is going to the floor.
It does have resistance and the brakes do work - but not as well as I would like.
So...
So my overland HJ60 is suffering from some brake issues...
Most of the time the brakes are OK (junctions, roundabouts etc), but if you need to brake very quickly I feel like the pedal is going to the floor.
It does have resistance and the brakes do work - but not as well as I would like.
So...
Hi Mandeep - thanks for the Kind comments - glad your going to use your 2H properly!
My car does not have A/C so I cannot help you with the bracket for the compressor. I contemplated fitting it, but glad I didn't as I find that having your windows open in Africa helps to connect better with...
No problem about the high jack (should be a Hi lift in my book!)
My German friend tells me that some of the military michelin tyres you can re cut the tread once it has worn down - yes the rubber is that thick!
On another note;
Today we visited some of the SolarAid projects that we...