i have a 93 4x4 with 3 liter and the idle is real low. what do i need to lok for to fix. wants to idle at about 250 rpm. think it need to be about 750.
have developed a loud squeak in the right upper ball joint is this a indication of going bad. fj is lifted is it time for some aftermarket uca and ball joints.
wanting info on the allpro sway bar links and the uper and lower links for the rear. looking to beef things up a little trying to get otheres opinion on them. or if some one is using them what they think of them. any info will be great.
looking a tthe trd air filter just curious if others are using this and if they had any trouble with oil from filter messing up the maf. or the k&n filter
have a 02 tundra and put a 2 inch spacer lift on a while back now the rubber boots on the stock upper ball joint are all mucked up and grease is exposed. do i need to go to a after market uca and ball joint like total chaos. if so how long do the after market ball joints last.
i have developed the door rattle. i know others have encountered this problem. what are the cures for this going to loose my hearing because of turning up the radio.
lifted my fj a while back all was good still is sort of. need some ideas on a front end shimmy is the best way i can describe it. mainly happens in curves and at slower speeds (30 to 40 mph).the steering whell gets a little side to side motion. at highway speed its smooth. is this alignment or...
been looking at the after market uca for my fj like totoal chaos. what is the long term durability of these for a every day driver with a lift who also offroads a little. probably a 90 to 10 ratio of on and off road.
helped a freind of mine put a 2.5 inch lift on a 02 tundra now when he drives the steering wheel shimmies back and forth starting at about 40 mph at about 60 the truck shakes like a tire out of balance. it is a revtec kit if this helps. now after about a week the cv boots are pushing grease out...
just wanting to know what the pros and cons of using lift spacers on the front instead of going with springs. i used spacers above the coil to keep from compressing the spring just wanting to know what long term affect thse may have on ball joints ect. already benn looking at toytec springs and...
i put a lift on my fj now i am trying to see how other people have solved a wondering problem on their fj. looking for some help and a cure not real bad but enough to be annoying. any help would be great.
looking for exhaust for my fj. wanting to know what others are using if they like it or not and what kind of gains you got from them performance,gas milageect. any info would be great.
past couple af start ups the light came on like it was suposed to then after it went off about 10 seconds later it flashed 3 times then went off for good. any answers for this? am about 400 miles from oil change is this a reminder?
getting ready to get lift installed was curious abou the ucas and caster. how many of you other that have a lift have had to change to a aftermarket uca because of alinment problem. if you have is this the norm or something that need to be done down the road after the lift has been on for...
looking at front bumper for my 07 fjc. is there any one that can be used that wont sag the front end a lot with stock springs. have a 3 inch lift coming but not going with new spring in the front. like the looks of the road armor and the demello with single loop niether look to overlyheavy.
how much have others had to cut off the body mounts to run 33x12.5 tires. to me it doesnt lok like much needs to be trimmed. just want to see how much others have cut off.