Search results for query: *

  • Users: DIFF LOCK
  • Content: Threads
  • Order by date

Forum search Google search

  1. SOLD  Gilbert, AZ: 2004 TOYOTA Land Cruiser

    6/19: Full-price sale pending to Montana buyer via Craigslist. Several other potential buyers lined up if deal falls through. Thanks. 6/21: Received non-refundable deposit of $500 from Montana buyer; giving him time to get his funding in order and hoping to complete the sale shortly. 6/24...

  2. Noise while turning under load.

    After installing my Ironman 2” lift kit and new OEM TOYOTA front drive axles, there’s a noise that shouldn’t be there. I would describe it as a metallic clank or chatter coming from the passenger side front. Like something is loose. I’m able to consistently produce the noise by doing low speed S...

  3. Made a $120+ mistake today. Ruined my Bora front wheel spacers.

    I’ve owned these 1.25” spacers (full set of four) for about nine months. This was only the second time installing them back on the vehicle and I got a false positive that I had clocked the fronts correctly against the hub. There’s only one position out of five in which everything lines up...

  4. For Sale  (AZ) 100 Series Old Man Emu OME 2865 Springs + 10mm Trim Packers

    Used less than 750 miles and then I switched to an Ironman 4x4 Foam Cell Pro 2" Stage 2 lift. $150 for the springs (minor wear to the underside of the bottom coil). $15 for the trim packers (some discoloration on the opposite side, but otherwise excellent condition). Local face-to-face sale...

  5. Help: Turn signal wiring identification

    Hey all, I’m trying to wire up my Ironman 4x4 Classic Off Road bumper lights to connect into my factory corner lights/turn signals. Can you help me ID what each of these wires are? This plugs into the bulb socket for my OEM corner lens. Colors are: Green with yellow stripe Black with white...

  6. SOLD  Gilbert, AZ - Low mileage OEM 100 Series front and rear shocks

    I switched to an Ironman 4x4 Foam Cell Pro 2" lift kit, stage 2 on my 2004 Land Cruiser and no longer need these parts. OEM TOYOTA/Tokico front and rear shock absorbers with less than 750 miles on them. Front part # 48511-69467 and rear part # 48531-69685. $125 for the full set. Local sale...

  7. Help me decide on front end lift solution.

    2004 Land Cruiser w/163K miles and non-AHC. Currently has: + New OEM TOYOTA shocks on all four corners + Factory torsion bars turned up + New Old Man Emu 865 springs in rear + 10mm trim packers on both sides Sits like a stink bug. Center of center caps to fender measurements are: Front...

  8. Backup camera image missing red, yellow, green proximity lines

    I have a 2004 TOYOTA Land Cruiser with factory navigation and backup camera. I see images of the backup camera screen on both older and newer Land Cruisers and they have the colored proximity lines clearly showing. Mine doesn't have these. Is this a feature I need to activate in a hidden menu?

  9. For Sale  2004 Land Cruiser OEM Front Bumper (Thunder Cloud Metallic) + OEM Fog Lights

    Pulled from my personal 2004 TOYOTA Land Cruiser with 161K miles. Bumper cover was recently re-painted in the original Thunder Cloud Metallic paint by Caliber Collision in Queen Creek, Arizona when I had some unrelated work done by them. Included is the metal bumper (some surface rust that can...

  10. Ironman 4x4 Classic Off Road Bumper ordered… Do I need new front shocks?

    Thanks to @LXPlore 's YouTube videos and other research, I pulled the trigger on an Ironman 4x4 classic off-road bumper for $1,028.81 out the door. Currently 25% off site wide + FREE SHIPPING. Will I need to upgrade my front shocks? If so, which brand/model? + I do not plan to run a winch...

  11. Tips for removing rear shock from lower mount?

    I’m stuck at the moment. I’m trying to install Old Man Emu 10mm trim packers on stock springs with stock shocks. The rear end is supported by 3-ton jacks which aren’t very tall. With the rear wheels removed and the rear axle unsupported, things are sitting pretty close to the ground and I...

  12. LC Clear Corner Lenses … Trim Your Bulb Socket

    To get your USDM market bulb socket to properly seat and click into place, trim the slanted nose off the widest tooth. Take a razor blade straight down to separate it and then come in from the side to cut it free. Doing this in reverse order runs the risk of trimming too much material off. Take...

  13. Your Tacoma is cute. This Hilux wins.

    TOYOTA Hilux technical; equipped for pipe hitter stuff down range. On display here…

  14. How would you fix this? Dome light mess.

    My 19YO son recently bought this 2006 TOYOTA 4Runner SR5 V6 2WD with 180K miles on it. PO had a shop install a flip down DVD screen with integrated dome lights in place of the original dome light. It was broken and wouldn’t stay shut, so we removed it. Left behind was this sloppy mess. The...

  15. ebay Snorkel Install... Didn't go how I had hoped. WWYD?

    Worked on the installation this past Saturday. So in the after action report, I would say I made two errors: (1) I placed too much trust in the template being accurate, and (2) should've elongated my 4.25" hole to compensate before proceeding with the remaining holes. But not doing either of...

  16. Opened a can of worms... Pulled battery and tray after traces of rust spotted.

    Full disclosure: I'm not a paint and body work guy, so I have no idea what I'm doing. I'd welcome any guidance from guys/gals who know the right steps to take care of this. Backstory: New-to-me 2004 TOYOTA Land Cruiser w/161K miles. Noticed some rust around the base of the battery tray, and my...

  17. SOLD  80/100/LX450/LX470 TEQ grill badge, BH3D Printing

    Just purchased for $40 shipped from BH3D. Had it mounted to my grille for a few days, but then got overruled by my wife :confused: and "encouraged" to switch back to the OEM Sombrero badge. Don't laugh at me! Replaced all the adhesive with brand new 3M Auto Super Strength Molding Tape, which is...

  18. SOLD  Gilbert, AZ - 100 series OEM Optional Equipment: Drop Hitch + Hood Protector

    These two items were optional equipment from the factory and were installed on my 2004 TOYOTA Land Cruiser at the time of purchase according to the original window sticker. DH Drop Hitch w/Ball Mount Kit was originally $379.00. Obviously there's no ball mount kit anymore and I've since ditched...

  19. Help with roof paint restoration - Now with roof rack delete for more complexity!

    2004 TOYOTA Land Cruiser in Thunder Cloud Metallic What I've done to the paint thus far: + Washed it (duh, but it's an important first step) + Clay bar'd the entire vehicle (Meguiar's Quick Detailer and Clay Bar) + Two overlapping passes on the roof with Meguiar's Ultimate Compound using an...

  20. Requesting help ID'ing TOYOTA part numbers

    Hi all, I recently picked up this 2004 Land Cruiser about six days ago and I'm trying to replace any corroded or broken parts as I come across them. I've reached the extent of my search-fu in the TOYOTA parts diagrams and am hoping the hive can help. I'm looking for part numbers so I can order...
Back
Top Bottom