So i have a 4 barrel carb. Wen i step on it i can see only 2 barrels open. Wen i maually move the links to make the other 2 open the engine obviously revs up really fast. The links to the unopen barrels seem to be connect to an electronic choke i believe. So does this mean these 2 barrels are...
eBay Motors: 7" ROUND DIAMOND CUT HEADLIGHTS CONVERSION KIT H6024 H4 (item 270288710556 end time Oct-21-08 19:02:23 PDT)
i have a pair of sylvania $40 light bulbs for them too
they come with 2 H4 bulbs but i paid 40$ for these two bulbs at walmart so im sure they are better being the 2...
I wanted to put strobes on my front head lights. My 79 fj40 obviously has the glass housing lights. Can u drill into them? I heard they are pressured with gas? if so, will drilling into them and releasing the pressure of gas do harm?
thanks
well how can it not be much faster
i would be going from 125hp to 360hp
i never really research droppin a 350 or 383 in
so fill me in i would imagine it being 10 times better no?
my dad bought the fj wen i was born and i took it over a couple years ago
the size of the tires are 33x12.5x15
i plan on droppin a 383 in but as of now the engines runs fine and thats a big a project for me and lots on money i dont have
My mutts- Roofless one is an A1 and the other one is an A2
cruiser wasnt on ebay i had it since 1991
the bends are from off roading and the tires hitting the body OUCH!!!!!!!!
1979 Fj40 , rebuilt F2, Original paint, 4in lift, 33 BGF, rebuilt tranny, lots of new parts under the hood, flow master, much much more
Couple other toys :flipoff2:
ok i got a 4 inch lift and now my steering wheel has to be turned a half turned to the right inorder to go straight
i do i fix this
do i just adjust the steering wheel or do i mess with the steering box/links you know wat i mean
it vibrates in 2wd at about 25mph and up
and for sure its becasue of the lift cause i had it for ten years and just lifted it
i put the shims in the rear cause when i eye ball it the rear looks like it needs it
i corrected the pinion angles back to original using the shims
so i was just wonderin...
ok so i have a 4 inch hell creek lift and about another 1inch lift on a shackels
so a total about 5 in and no doubt it vibrates like a mother &%$#
so i installed some shims and was wonderin if that would do the job
or am i goin to have to do somethin to the other side of the drve shaft
Ok if i want to put a set of shims on my rear axel
do i replace the stud on the leaf spring
because if the shims are added the stud isnt long enought to go though shims
Ok so i have a 4inch lift and i have a vibration problem
so i decided to get shims
i have cut some out of 1/2in , 1/4, and 3/8inch metal
which one should i use for the correct angle
or should i go bigger?
thanks
ok so i got a 79 with a 4 inch hell creek suspention lift
i installed it and now the drive shaft causes vibration wen goin like 25 and over
i took the driveslaft out and measure and it fits good
so its not a short drive shaft
any solution?
mods?
how?
were?
ok so i have a 79 fj40 and just bought a 2.5in flowmaster.
as u probally know the F2 stock exhaust is a 2incher. so im tryin to finda adapters but i need to help on the fitting first. like the acual flow master doesnt fit perfect in place of the stock mufler. is it ok to tweek the flowmaster ...