Arizona Classifieds / For Sale / Wanted (11 Viewers)
- Thread starter blatant
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
8ft ARB Awning with light strip (white/amber/dimmable) Located in Central Phoenix $300
.
Last edited:
Three Rock Warrior wheels for sale in Phoenix.
SOLD
SOLD
Last edited:
Doing a chop on my 80 so have everything from the front door back for sale.
-ARB drawers with 80 series figment kit-sold
-4x4 labs rear bumper $800 for bumper $1,200 for swing outs and bumper
Wits end quarter panel $250
Rear tailgate storage-$225
Custom built front 8274 bumper-$500
-ARB drawers with 80 series figment kit-sold
-4x4 labs rear bumper $800 for bumper $1,200 for swing outs and bumper
Wits end quarter panel $250
Rear tailgate storage-$225
Custom built front 8274 bumper-$500
Last edited:
$20 for both of them.
4 2018 GX460 wheels, 18x7.5", 52mm offset, in very good condition with the exceptions of brake dust and some tar that cleans off easily. No TPMS/valve stems. Club price $250, local pickup only. Proceeds will be donated to TRAL.
Looking for a 4/85-7/87 FJ60 tunnel cover / inspection plate & boot for my H55 swap
Last edited:
Grimmjow
YūGEN
Sent PM
Living in the Past
SILVER Star
The one you want looks like the red one on the left. The one on the right is the 10/82-4/85 style. Seen this with boots for sale used in the Middle East. One the transfer case shifter was for the skinny shifter. The other for the later fat shifter.
If your have a 4/85-8/87 you already have the correct parts. For a FJ62 this is what you need plus a 3F bellhousing.
SOLD I am going to be in the process of installing a GPS speedometer in my 40 so I am going to be selling the gage and cable that are for a 74 even though mine is a 69. The cable is brand new and the gage still works
The bezel isn't for sale just posted to ask for ideas as to put a round peg into odd shaped hole
The bezel isn't for sale just posted to ask for ideas as to put a round peg into odd shaped hole
Last edited:
Cool - I hadn't actually previously seen those two side by side to know what the difference was, so thank you. Still on the hunt for the later plate and boots. I have everything else ready to go!
Living in the Past
SILVER Star
The ring for the transmission boot has five sides. Earlier is only four and won't work. For some reason the later boot and the transfer case boot for the skinny lever are hard to find. If your converting a FJ62 the high/neutral/low boot will work the later fat lever used after 8/87 on the manual floor shift.
Not sure I'm following you here - are you saying my existing 89 xfer case boot will work? I haven't pulled anything apart yet. thanks for the info!
Living in the Past
SILVER Star
The boot opening for the transfer case is same 4/85-1/90. The shifter is being made aftermarket for the earlier skinny lever. 8/87 the manual shifter was fat like the vacuum 4WD with manual high low shifter. Have source one but thinking about finding a fat shifter. Have the OEM skinny lever already. Another picture I found of the two covers.
Two of the red inspection covers are from FJ62s and verified the transfer openings are the same as the late FJ60.
I've played around putting these in an FJ40. Transfer shifter is from a turn of the century 70 series.
***SOLD****
80 Series Prinsu Rack for sale. 2 y/o some scratches but in excellent shape. Paid $1000.. I'll let go to CSC members for $750. Comes with crusty splattered bugs,
but the doggy isn't included.
80 Series Prinsu Rack for sale. 2 y/o some scratches but in excellent shape. Paid $1000.. I'll let go to CSC members for $750. Comes with crusty splattered bugs,
but the doggy isn't included.
Last edited:
Anyone have a set of OME 860 springs they want to get rid of? I have some 863's if anyone wants to trade, or cash if someone has a set for sale. Thanks
