Troopcarrier hj75 1986 (2 Viewers)

[Terry2can]

Gday Toyota Landcruiser hj75 troop carrier 1986 I’m having trouble fitting my drive shaft back in, my driveshaft measures 1335 mm overall when fully compressed.
My leaf springs measure 1260mm from Centre of the eye to centre of the eye and also measures from the front eye to the centre of the locating pin 570mm measuring in a straight line to the centre and the rear eye to locating pin is 700mm.
What else has would these measurements be close to fitting in a landcruiser??

 

[roscoFJ73]

I cant see what would stop it going back in. Is it too short or too long?
Have you done a suspension upgrade?

 

[Terry2can]

It’s to long and yes new springs n shackles total of 3” lift.
As the vehicle is lifted I thought the drive shaft needs to be longer??

 

[roscoFJ73]

How about telling us the full story instead of bits and pieces

 

[Terry2can]

How about u get fkd I have told u all

 

[ceylonfj40nut]

Roscofj73 is trying to be helpful. Don’t read into this. More info you share the better you get help. Simple. I love this forum because of folks like Rosco.

 

[Reinhardtius]

How about u get fkd I have told u all

Yikes

 

[Mookies]

How about u get fkd I have told u all

Thats the spirit.....

Go to a driveline shop and swear at them, I'm sure you'll get all sorts of friendly advice.

 

[roscoFJ73]

How about u get fkd I have told u all

Ok , you just lost out on the best Landcruiser resource in the universe. Just so you know, next time you post a question on tech forum, tell the whole story and don't expect helpful people to guess and fill in the blanks

 

[61Mk+]

How about u get fkd I have told u all

Somebody needs a spanking.

 

[Terry2can]

If ya good enough