Recent content by The White FJ62

Hello Folks! I've always had a temp gauge that sometimes like to peg itself out above hot, even though the truck is running fine. It will do it maybe once every 30 minutes, for 30 seconds or so. Not that big of a deal, but I noticed yesterday that the fuel gauge did the same thing (pegged...

Thanks for the help guys. I ended up taking it off and AutoZone tested it good. I reinstalled and made sure to clean up all the terminals before bolting it all up. Fired her up and everything is charging fine. I guess there was some ATF fluid on the terminals the first time I bolted it up from...

I installed a remanufactured Toyota alternator from Toyota Parts Deal into my 2000 UZJ100. Everything went together well enough, but i then discovered the new alternator wasn’t charging during the test drive. I’ve pulled everything back apart to verify that all connections to the alternator are...

I’m in the middle of this as well. It took three different installers to even try to install the glass. I ended up having to install the trim myself. I thought I had the new trim in correctly, but I’ve got some wind noise going on as well. Looking for answers that doesn’t involve taking the...

Used, but I’m good shape. Rago Fabrication aluminum mount. I had a ARB Duel compressor mounted and then sold the rig. Retails for $138 plus shipping. Take this one for $75 with free shipping.

There won't be a list here as part numbers change so often in the car audio world. You can filter the search by depth (this is what I did on Crutchfield) and it will show you what will work.

Maybe the difference is I’m not running a lift…..yet. Thanks a ton for the help.

I was able to make it trip with the drivers seat tilt motor so I think you are pointing me in the right direction. I’ll check it out and will let you know

The lumbar motor might make sense as I just has the seats recovered last week. Thanks for the help!

I did my research and most everyone said that my 2000 LC should have zero problem fitting a 285 75 16 in the stock tire location. I guess I should have checked if it fits with what looks to be a factory tow hitch. I pulled a tape measure and I’ve only got 32” from the hitch to the pan hard bar...

I've picked up a blown fuse problem on my "new to me" 2000 LC that seems to be associated with the starter going out. I've had it for a month with no problems, but yesterday I went to start it and it clicked on the first try and then started right up on the second try. I then noticed that my...

I’ll be at the state park on the 12-14th. Look for a green FJ80 and a silver GX470

The next couple of weeks are some of the busiest for that area with spring break and favorable weather. It’s going to be tough to find much I’m afraid

Installed a - rated spring on the opposite corner per the ARB tech support. It’s not perfect, but much better than before

Fixing the gansta lean from the ARB lift install a couple of months ago. It’s done nice because it’s all done twice…