sadam_husain's latest activity

Part number for that one is 65896-90K00. Just FYI

If you have not, try swapping injectors I would also just do a compression test over pulling it apart again, like Rigster said. I feel with the stuff you have already done and the smoke going away when you pull that line, it is either the...

I just had to say - kudos on shoehorning that 1HZ into your 4 runner! 😲 Did you compression test the cylinders? If the compression is all good, I would not be too concerned about piston rings. Have you tried testing/moving the injectors? IE...

This bolt covering plug is missing on the pass side, but I have one on the driver side. Any idea what it’s called and/or PN?

In WI there is an ECU repair shop that will repair my ECU for $139! Customer Forms - Shipping & Repairs | Tanin Auto Electronix - https://taninautoelectronix.com/support/customer-forms/

From your previously posted video, it looks like you were driving up a steep off-road ascent (Gegham Mountains in Armenia?) with a very heavy vehicle. If I recall, that track goes up to about 3300 m which, for my Hilux (powered by an engine which...

Thank you for your response. What is interesting is that I never have black smoke. It goes directly from running fine (of course a bit less power in elevation) to white smoke. At least if there is any black smoke it is VERY VERY little. So Yes a...

Hi @AirheadNut, Thanks for the info, I did some more snooping around and was able to find a wiring diagram from legend @GTSSportCoupe posted. The fuse box kick panel inside, says GLOW on one of them and as I said above there's no terminals or...

Just looked and mine has one of those too, never knew that it was a primer! 😂 Would that be for priming the fuel lines after changing the filter?

My new to me HJ75 this is Pumpkin Troopy's old rig

I have a 1986 bj75 that was originally from the collahuasi mine in chile, and was wondering if anybody had any photos of the mine where they were visible or like a lineup of them. Thanks

Thank you for the info!

I made a 12H-T swap on my Bj75, it is technically identical to the Bj70. These links may be useful to you (please use a translator Finnish => English :)) Offipalsta.COM - Näytä yksittäinen viesti - BJ75 SA-1084 -...

Mine is rusted out. I currently have a body shop working on it. They were going to fab the metal but decided it would be better to find one to use. I am trying to get in touch with 2 sellers on Alibaba, but I have to buy at least 5 sets...

After testing the glow plugs and busbar... give the resistor a test. Had similar symptoms with all new IP, injectors, glow plugs, bus bar, 1HZ after a rebuild. Hadn't replaced the resistor because NLA and that was it for me. The glow resistor for...

This is actually very common on 1HZ's , when I fire up in cold temps I immediately either turn on the hand trottle or push the accelerator in a bit to raise the idle and get trough those first 20 seconds . It's just the nature of the beast

Best regards from the Western Alps (Salbertrand IT, Briascon FR). Cheers Ralf

When you say heavy rig and extreme offroading, how heavy and extreme are we talking here? Blowing up a 2L-TE doesn't take much, but I'd be surprised if your A343f would have been destroyed by any 2L-TE without a lot of abuse. That transmission is...

so my heater valve has been goofy for the last few weeks. So upon messing with it, appears that it’s stuck. I’ve unhooked the actual cable from controls and it only moves a little. Always great to have the heater stuck on in 102F weather. The...

How cold are your mornings in July? What is your glow routine? On actual cold winter mornings I will double glow mine and it starts perfectly.

I'm at the wrong end of the world to attend this event, I've ordered a T Shirt from Odd Iron Offroad to support the event, RIP Peter E. Brown

As requested here is the plug Designed by @sleepydad69 Made in flexible material, I added .7mm to the height for a good compression fit. https://solvefunction.com/shop/ols/products/70-series-knuckle-plug

Hi, beautiful Land Cruiser! I know this is an old thread so sorry to jump on it so late. I have an HZJ77 and am putting an old man emu lift kit on it. The rear springs I received are CS006R which are too short. I tried installing them but it just...