RUSH55's latest activity

Why indeed.

I haven’t done a metal working job without this since I bought it. Usually I hit spotwelds with cutters. I’ve seen them done with the belt sanders. The belt sanders are supposed to be a lot faster getting things apart, but don’t know how well...

They all go tagether 🐖👈🍺🍺🥃🥃🤣🤣🤣🤣🤣

That's creepy, hard no! But I do appreciate you thinking about me:beer:

Check ya mail Bitches @J Mack @RUSH55 🤔🧐😲😮😳😉😏😘🤣🤣🤣🤣🤣

Solid way to spend the day!! Tomorrow you got 276 pages of the Third Edition to read,,, There will be a test!

Wait a minute, I'm trying catch up here today after farm work and I'm reading about welding tips, drinking decisions and boner advise. :hmm::rofl:👌

WAIT FOR IT, WAIT FOR IT, WAIT FOR IT! 🐖👈😮😳😲🧐🤔😏🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣😘😮😳🤔🧐😲😉😏🐖💩👈 it's coming 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

What he said 🖕oops wrong finger 🤣🤣🤣🤣🤣🤣👆fixed 🤣🤣🤣🤣

I have one of those, great for cleaning up weld splatter in tight spots.

I use screwdriver 🪛 n⚒️😏😉

🐖👈🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🐖👈🤣🤣🤣🤣🤣

What you think about peeling all the damaged outer sheet metal off the the inner brace then clean the brace up in place before adding the new outer skin material? This method would give you a hard spot to shoot for to keep your existing door gap...

For the sake of some conversation, I want to your guys take on this upcoming fender project. Back in the day when my rig was first acquired, it had this funky damage between the drivers door and fender (no idea what happened. Overextended?) and a...

I did that once and now she wants child support. its a scam

**** you see 👀 da itwerwed pics 🤔🧐😲😳😮🐖👈

How much fo Dollhouse "N" TP 😘

👋🏻🥵

🦨👈

Me BRAIN 🧠 Hurts again 😪!! Gnite ya ****ing Sluts 🤔🧐😲😳😮🍑👈🐖👈😏🤕☹️

Personally I would spray it down with a hose first that way you can see how far the heat spreads. But the main key is as soon as your done you hit it with a hose again so you can paint it sooner without it being exposed to the environment and...

I somehow ended up with the bottom floor of an FJ55 rear heater, no motor. After seeing stock fan motors cost a zillion bucks, I opted to modify a new mega motor into the floor since they cost a small fraction of the factory motors. New motor was...

Got the engine broke free in the blue and white 71, it has been sitting for a very long time. Need to pull the valve cover and test compression 🤞. No engine in the green 72, had a pulled v8 in it, still has trans and transfer case, body is...

Wet Willy 🤣🤣🤣