lumbee1's latest activity

Good luck however this may be impossible. If I remember correctly, the engine harness is tied in such a way that the runs to sensors has very little slack. I don't think there's enough slack to pull up the wire and make the repair. However, I...

So what's gonna happen is....: I bought a finished plug pigtail and gonna see if I can satisfactorily get it mated and waterproofed through the fender (reminder - Rear sensor), if not to where I'm happy, the upper intake comes back off so I can...

Knock sensor connector - https://forum.ih8mud.com/threads/knock-sensor-connector.1277597/ If the pins are still good, you can depin it and put the pins in the new connector. If it's the top of the knock sensor, that's a little bit more expensive...

The sensor wire connector broke off - apparently weak after 30 years... The front can be had from the top, the rear requires going in through the wheel well. I'm not stressed about getting power to the wire on a splice. I'm more worried about...

Nice. I think I’m going to have to mount the methanol pump there.

Not understanding. Did the knock sensor break or the connector that attaches to the knock sensor? It's accessible from the top for sure. I had to pull and reinstall my main engine harness in the yard. Everything still attached.

The Cruiser originally came with nice cast (some say forged) wheels which limit the tire size to 35". I know there are 37's for 16" wheels but they are very limited and expensive. 17" wheels have become the small wheel / big tire standard and...

Run it behind the air hose for sure. Then you can install the Delta washer relocation kit and have a 2nd battery. SOLVED: Windshield fluid washer reservoir with SC and dual batteries

more pics

Tail end of a 4 week road trip with the family. Great time, enjoying the sites of this amazing country. Headed north to Ohio and then Michigan. Always wanted to see the Upper Penisula so we hit that and went over to Wisconsin, then Minnesota...

Wow! Amazing story and photos! It's so awesome to see a raffle winner for Relic Run put up a post like this.

As we packed up camp on that chilly Sunday morning, Sean, who we had met a few days prior as he wandered the campground, stirred in his really nice LX 450 he was sleeping in. He opened the rear slider window and offered us all hats that he had...

Welcome. You will get much more informative answers here than reddit. I don't know what contributes to crank no start on a 3fe. I wouldn't throw any more parts at it. Check electrical. Could be a relay or fuse. Repla e any questionable fuses...

12.954 Volts

Dunno. It's been sitting in my garage for almost 2 years. I can check when I get home. Sadly I didn't even get around to buying a lithium charger for it.

I tried using my original harness however it was crispy and every injector connector broke. The $550(?) for a new wire harness seemed like a solid investment and eliminated any chances of electrical gremlins after the supercharger install. It...

Keep it.

Nathan was wheeling by himself late at night (solo truck) and his 100 became parched.

Bussmann CB185-60 Waterproof High Amp Flush Mount Type III (3) Circuit Breaker (60 Amp) https://www.amazon.com/dp/B001PYL4UA $10

I have an 80 series OEM windshield washer reservoir. It is not cracked but has the typical UV damage on the top. I used the pump for my new reservoir. $60

I'm selling my Battle Born LiFePO4 battery. I picked this up used a few years ago to add battery capacity to the Cruiser. I learned soon after that it's not meant to go under the hood due to heat. I changed plans to put it in the rear, but never...

No

I drove my 80 to the gym. However and more importantly, I changed the front brakes on my 2013 VW GTI. It's tuned, has upgraded suspension, Borla exhaust, and I can't stand wrenching on it at all! Everything on the car is made of brittle plastic...

i'd love to build me one of these shaker things that you put under each wheel. Saw one of those things in a FB reel one time. You do need a two post hoist first! If a local shop would offer that kind of service, that'd be so killer!

refreshing carpet - remove the seats and spray it with Dawn and a pressure washer. My carpet went from a possible source of swine flu to 90% new quality carpet. new seatbelts - remove and wash in Dawn. If they don't retract, tighten spring, if...