Recent content by hb1980

Hi, I have a JDM UZJ100 (so Right Hand Drive) with similar Electrical Gremlins chasing a windshield leak. So in my case its the passenger side that is a pain to remove. I have done this twice, first time to clean to solve the issue, and 2nd time replacing the whole Junction Box because cleaning...

Hey everyone, Just an update on the install. So I did a DIY over the weekend and managed to get the kits installed. I started with the fronts and moved to the rear. I must commend Dobinsons on taking end user/dealer feedback seriously. It's in the smaller details and product improvement that...

@crikeymike thanks for confirming that. Shows how Dobinsons is proactive with client feedback. I'll hopefully post back on the install.

Hey @crikeymike, I'm sure they are the correct package 682s and 782s. I ordered them from UAE and got in touch with the workshop manager. He sent me some pictures of how the newer setup is being installed, pretty neat but needs some trimming at the inner fender. I see this as a much better...

Hey guys, Update on Rear shocks. I received the package but unfortunately there are no clear install instructions or user manual for a 100 series. Also Dobinsons seems to have updated their kit as I received MRA59-682s with longer hoses and brackets for remote reservoir, not piggy back setup...

Hi Guys, New to the world of Dobinsons, but after a lot of research, i just placed an order on Torsion Bars TB59-1600, Rear Coils C59-167s (running mostly stock with slight constant load, 1 set of MRA59-682s front and MRA59-782s rear as i'm not looking at a serious lift. Awaiting delivery on...

Hey, I ordered it in April 2019. Its only sold in South Africa but not listed on their website. You will not find it anywhere else. You will have to send a query and a technical rep will get in touch with you.

@2001LC, Thanks for the feedback. So I'll update you on the OAT readout.. just like you mentioned, I went mad and wiggled and smacked both LH and RH JBs and the OAT read is perfect now, just miraculously. But I have a bigger issue now which entails taking the whole dash apart.. the dreaded...

@2001LC, bumping on an old thread. I am having the exact same issue as your case, bad windshield install history + sunroof drains blocked. Etc. Somehow this issue had happened after I thought the issues were fixed when the car was taken for a pressure wash. Though everything seems dry. Just want...

Yes, the reason for the cutting the slat is because of the mounting point to the foot rails. The slat was not required. I ordered the extra length extension through Feontrunner South africa. Reference was RRSP4SL1 length 721mm 4 slat joining rack side profile.

I timed the pump this morning to 29 seconds

@2001LC thanks for replying to my post. I noticed the delay when I put the car on a Cardiff with someone behind the wheel, put it in drive and the step on the brakes while I watch. I've had the calipers all rebuild with new seal kits, and changed out the rear caliper pins and boots as well no so...

Hi, guys, Firstly I'd like to thank Skidoo for this write and all the members who've contributed to this post. So I have a 2007 LC100 and I had a complete Master cylinder assy replacement 3years back when I got the vehicle (PO had really no sense of PM or any maintenance at all.) Just 2 weeks...

So guys, update, there are no codes, not with Techstream, and not with Launch. I did try and get some bleeding done with Techstream over the weekend and got a bunch of air out from the LHS Front. But still have a very soft pedal. I also went out on a gravel road and hit the ABS a couple of times...

Hi Guys, I have 2007 JDM 100 series without VSC. I replaced the whole Booster assembly about 10000 miles ago and brakes have been fine until the recent past where I've started experiencing 2 types of intermittent symptoms. 1. Brake pedal goes in when braking and no braking power.. second pump...