Recent content by GOTMINE

I'll have a go. Thanks for spreading the good cheer.

Thanks! Merry Christmas.

That's what I thought too:frown:. Nat, I may need your spare. I have been looking around for a used one. Let me know if you come across it. Tenzig, I made a little progress tonight and was able to get to the o-ring. It was very brittle. It's still not out though:crybaby:. I'll try again...

I am doing the HG on my 94 and ran into a problem getting the distributor out. I removed the bolt through the elongated slot and thought it was a little weird when I wasn't able to rotate the distributor or pull it straight out. I sprayed PB Blaster on the mating surface between the head and the...

Bump...

I know you said you sold the engine. Did that include the distributor? If not, how much would you want for it? Also, how many miles are on the truck? Thanks, Neal

Like the title says, I need a distributor for a 94. I think the distributors for 94 thru 97 will work. Thanks, Neal

Do you have the distributor still? I'll send a PM too.

Do you have a distributor for a 94 FZJ80? If so, how much would you want for it? Thanks.

At low rpms, my power steering does not work at all or at least very little :crybaby:. Unfortunately it's at low rpms when I need ps the most. When I have the LC in neutral and rev the engine, the ps comes to life. I have checked the fliud level in the reservoir and it's where it should be. I...

I had the same noise but didn't find out where it came from until it was too late. I was in southern UT on the Hole in the Rock trail when my sway bar moved over and broke my PS brake line. I had to drive 90 miles each way to Blanding in my brothers truck to buy/fabricate parts. :mad: We eneded...

Please count me in. I will need this kit in the near future. :) Thanks

I need an ABS harness for a 94. I need the front harness that goes along the control arm on the left side. I don't need the sensors and I really don't even need the part of the harness that goes from the center of the front axle to the right side.

I know the harnesses are different between 94 and 96 models. I'm not sure about the 95. I can't really use the later model harness because they don't mount the same. :frown:

I pm'd you. Here is a picture of the part I need (circled).