Recent content by Cruiser nancie

The way I ran my air system. Compressor under the hood on the frame rail down where the a.c. compressor sits. I ran a line back to the tank witch is on the roof behind my roof rack. 3 gal tank. From the tank down to the water separator. From there it goes to an air disconnect on either bumper...

**** Found the issue, and the fix! I decided to pull the fuel pump to see what the filter sock looked like and the condition of the pump/ sending unit. Well i pulled it out and the pump just hung bu the wires. The hose clamp that holds the pump to the pickup tube for the sending unit had...

Thank you. Buying a level gauge

Hey guys i have been working on my on board air system. I wanted to know if anyone has put an air/ water separator between the compressor and the rest of the air system. it does have a pressure regulator on it with a max of 180psi and the compressor says 200psi so will this infact put...

I have all new hosing for intake. Anf ibe done everything you guys have listed Are there any vacuum lines that are under the dash that i may have missed?

Wanted to through it in there if someone has a better idea for a level gauge please share

Hey guys, Im working on a on board water system and had a question with some electrical i wanted to know if i can use the tank water to connect the ground side of a circuit For example i want to put a grounded post at the bottom of the tank and at certain increments put a ground post for a led...

Hey guys, I have been having a constant cel for system too lean. But thats all i get. Ive gone through all basic system lean replacements and checks. No results. Will the diag port under the hood on the firewall tell me more then just system to lean?

Thought id post this info on my readings

Update.. Reset the computer Runs like a turd Ltft 0 of course Stft at idle 19.5% same with throttle Something i noticed witch might break the mystery.. At idle 19.5% but for a second when i hit the peddle any amount it goes to 0% then right back to 19.5% I think i remeber from lincoln tech...

O2 sensor is denso oem, Had the spark plugs for 15,000 before system lean pulled them all last week and they look fine, Cold air was installed after system lean issue as there was a tare in the factory air tube , Exhaust is a jimmy rig, about 8 inches after the cats it goes through a step up...

Alright guys my name is matt ive had my cruiser for a year now no issues when i got it. 167,000 miles all maintenance maintained. Runs 15w40 cold air intake and high flow exhaust. Dual battery So the issue is a get a system too lean code po171 and she runs around 190°f coolant and 90° to 100°...

1] 1997 fzj80 2] matt 3] Nancie 4] 167,000 5] light bars all around with wireless remote system, cb radio in dash, dvd stereo, dual power inverters, 200psi on board air system, train horn, front and rear air hose disconnects, air powered water pump, on board 30gal water system, chrome alloy...