Recent content by 93 cruiser ben_jamin

I am parting out cruiser, it has an OME "J" lift with nitro sport shocks. The tires are MTR Kevlar 285/75r16. The axles have factory lockers. The engine runs great just passed emissions in September. Let me know what you want and I can send you a picture along with the price. I am located in...

I thought Edelbrock stopped making shocks.

What are the part numbers on your shocks? The only shocks I can find that are for the 80 series 4" lift are the XGS Gold shocks that are part number 650GEL180B and 650GEL280B.

From what I can tell the Tiger shocks will only work up to a 50mm lift. The correct part number for the high lift application is the 650GEL180B for the front and the 650GEL280B for the rear.

Outside of the springs there is another factor to remember and that is the shocks paired with the springs you're using. There are a couple differences in the shocks that are in these kits that also affect the ride quality. One similarity in with all three of these companies is they use a twin...

Here is a good starter kit for the FJ's 3" FJ Lift w/ front & rear coils - Toytec Lifts: Toyota Lift Kits: FJ Cruiser Lift Kits, Tacoma Lift Kits, Tundra Lift Kits, 4 Runner Lift Kits, Sequoia Lift Kits, Toyota Truck Lift Kits just run the 884 coils with top plate spacers and the Toytec...

Get a castor sweep first and then get the right bushings along with Landtanks template.

Thank you, and that is good info. Mine is my dd and where I wheel there is a lot of flex as well so I will have to see how much mine settles.

not sure how the old nitrochargers were, but these are a lot better than the stock shocks that were on there.

ya my premeasurement was 34 and 1/4 all around after was 38 in the front and 39 in the rear. Also the new nitrocharger sports are super nice.

Finally my lift is on I went with J all around and extended my 3 frame to axle brakelines. I disconnected the front sway bar, no castor correction still haven't experience any wondering or weaving even at 80 mph. I will still correct the castor once the DC driveshaft is in the budget and after I...

if you use 8 wrap it usually gives you 4 to 4.5 inches of lift and 9 wraps give 5+ inches they have different colored dots on them so you can tell.

Was looking online for tires and wanted to spread some good news. Tirerack.com has 315/75r16 Duratracs for 219.00 a piece. The 285/75r16 are 216.00 a tire.

I have done some searching and can only find one diff skid. I was wondering if any one else but trail gear make a diff skid? I nailed my front diff plug on a rock when wheeling on Coney Flats, no severe damage but want to protect them. Also looking for one for the rear.

How much for the rims? would be willing to pay for shipping to co