tornio

yes there is no evidence in any manual but probally this tube is not the cause of the problem

yes i know it , my 40 has this earlier b engine on the 45 I changed the oil of the pump a little while ago. I know your documentation about air problems and the others , GREAT WORK THANK'S to share for the air , i have a lot of copper...

By any chance, do you know what the blue circled piece means or what it is for? THE FSM call it injection pump cleaner ... ?

What do you think the copper tube is used for? at that point it should be the air bleeder.... black circle , at this point i think that i can cut / delete this tube and the connection at feed pump inlet ... By any chance, do you know what...

i discovered these photo : this is my 45 when the PO did the camper conversion (1996) and this photo before conversion you can see that there was the same hose/pipe orientation but this was in the 1996 ... the truck is an 1976 so there is no...

hi duncanrm, my 40 and my 42 all have inlet toward the tank and outlet toward the filter... but if the feed pump is from a different vehicle why the copper tube seems factory ?

Hello guys, looking for a possible source of air into the fuel circuit I noticed that my lift pump (feed pump) is connected the wrong way: in the manuals and photos I have seen here on the site, the inlet is towards the tank and the outlet...