Megadoomer

would you use a cavity wax or fluid film method on an ABCD pillar? 100% yes, I’ve mentioned this several times in several places but I will share my thoughts again here. A pig is known to condensate and rust from the inside out, if we assume this...

oh ok, I didnt watch the second one. He was really dry and I was falling asleep.

Why does he only show the back of a butt weld, but doesn't show the back of the lap weld. Isn't there going to be areas for moisture and salt to be captured?

Questions about doing this. 1. would you use a cavity wax or fluid film method on an ABCD pillar? 2. Would you want some sort of paint on the inside of a pillar first? 2.A What is the method for doing that if so? Hypothetically, if you cut...

This is my go-to guy. His cut n butt method is faster than the way the guy above explains.

We get another, another 90 days for before it isnt cheap.

I bought this book many moons ago and read thru it a bit but mostly hunted out certain things I was curious about. Here is a link to the PDF. IF you go to page 162 it doesnt talk about how to weld a frame, but it does talk heavily about the...

ugh, gross.

730 days from my last day off ,, shop ownership is not what they say it is

All the sensors are either AC Delco or Delphi.

That's a good feeling. This was the time I found out that non OEM sensors are crap. Hopefully you didn't go the same route I went. I had to re-buy the cam sensor, crank sensor, and knock sensors.

I bet you have a handful of axes. You don't seem to shy away from tool ownership. If you don't have skinny jeans, just get fat.