RTaylor
Reactions
239

Latest activity Postings About Post areas Events

    • RTaylor
      I’m not trying to win the wheel spacer argument. I pretty much agree with the mechanics. Having extra lug nuts does add to potential balance issues and failure points. I’m not the only one who wrenches on my LC, so I didn’t want the risk of...
    • RTaylor
      I did look into 1" spacers as the equivalent clearance, but the extra stress of spacers doesn't work for me. I know that wheel spacers work just fine for plenty of others. How do we get OEM Toyota quality wheels in 18x8.5 with +35mm offset? The...
    • RTaylor
      Stock wheels, which I like. Are they 60mm? I’m anti spacers and anti cheap alloy wheels.
    • RTaylor
      Defn take a crack at it. It’s pretty easy. Taking the dash apart is a little intimidating if you’ve not done that before. But it’s totally doable. The wiring up part is dead simple. Check out the install videos, they’re really good. I say this...
    • RTaylor
      RTaylor replied to the thread The OME 2721 Mystery.
      2720 gave me ~1" and 2721 gave me ~2", but I agree it depends on a few factors that have already been mentioned (current fatigue of existing suspension and carry load). I've also found that the rear height will change slightly with the front...
    • RTaylor
      RTaylor reacted to bloc's post in the thread The OME 2721 Mystery with Like Like.
      2720s (aka -20mm supposedly IIRC) netted me over an inch of lift. Basically, it comes down to loading and how sagged your existing springs are. Fortunately they aren’t very expensive or difficult to change if you don’t like them. And you’ll...
    • RTaylor
      I've barely made 285/70r18 work. I can't imagine going up to 295 with the KDSS arms in the way.
    • RTaylor
      I really like mine. Much better than the FCPs that I had before. Holler if you want to test drive my setup.
    • RTaylor
      RTaylor replied to the thread OEM Front Coil Spacers Installed.
      Time for an alignment.
    • RTaylor
      I’m on the newest version and they seem better than prior two generations I’ve had. Call SPC and explain your issue with the current version and they may just offer you a warranty exchange…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom