oakback

Sorry I can't help since you replaced the rear sway bar bushings and end links already, but for someone else reading with a similar problem, I had a light metallic jangling sound on low speed turns and bumps around the neighborhood, solved it by...

Well, want to update this thread now that I’ve done the whole thing. Getting the new stud in was not as simple as I thought, so here’s a little writeup for the next person. Tools you need: - 22mm socket - strong impact gun (optional, risky) -...

What did you attach to the 80/20 rails to act as a platform? Or do you have a enough rails that your boxes/bags are strapped down to those?

I used a bolt threaded into the splined shaft and pulled. I had one that was real stubborn, so I had a helper run the engine, hold the brakes, and shift between D-N-R while I pulled. That worked wonderfully.

You talking about pulling the CV out of the diff or ? If it's that, just a pry bar.

Transmissions, differentials, and other parts of vehicles have air inside them. The air can heat up and expand, or cool and shrink. These parts need vents to let air in and out, otherwise fluid would blow past seals, or other problems would...

I'm envious of how clean your engine bay is. Not enough to clean my engine bay, but still envious.