You know what happens to a lifted Land Cruiser 100 with a Trail Tailor steel bumper on the front when you're driving at 65mpg to your bike ride in the morning and you hit a deer?
Nothing.
Poor health outcome for the deer, but not a scratch on...
We stopped at the visitor center and the grabbed some decent Mexican food at Chak Ballum in Torrey then we bailed out into Dixie National Forest.
We found a campsite at 10,580' by a lake. Unreal. Another awesome 200 mile off road day
Once we got back on Burr Trail we made a loop through Wolverine Loop then up past Boulder and into Capital Reef the back way through south creek. That's a pretty legit tough trail.
There is a cool in and out trail to the Capital Wash overlook. We ran into some Cajuns in a rental going up. It was funny. The wives bailed out. This land is huge and empty.
We woke up and made our way over to Capital Reef National Park.
The Henry Mountains are awesome. Glad we saw them
There are a lot of off road trails over there and I figured out the best way you catch them all.
The Burr Switchbacks were...
We had to backtrack 30+ miles but it was different scenery going that direction
At the crossroads we hit the road south to Hite Crossing.
We had to get gas for some and we went south to Ticaboo. I ran all of that from Green River to Doll...
It's pretty bulletproof. I'm almost 6000 miles into this trip and the only issue was a rock breaking my rear caliper off.
Edit. 6000 hard miles. I started the trip meter when we hit dirt in New Mexico.
80+% off road since.
Bumping the old thread as this may help out. I found a still available Denso fuel pump ( 951-0020 ) that worked for my '01 LX470. Looking at the Toyota parts diagram part numbers, looks like the base model 2nd gen Tundras that came with the 4.7...
Introduction by a long time listener, first time caller.....
Have owned a bunch of new and used 4WD Toyotas over the last 45 years, including 40, 62, 73, 75, 77, 79 and 80 variants, plus a couple of US spec Prados. Liked them all loved most and...
No, CC doesn’t disable OD. However, I find the CC on my ‘01 to be very aggressive and quickly downshifts to maintain the set speed, even on minor inclines.
There have been a few times I’ve seen the CC downshift to 2nd gear then upshift to 3rd...
The master is doing his thing, installing a set of OEM UZJ100 strips for @wardharris. Once I get to this point, I'm done with a project and moving on to shipping.
May Allah help me with all projects.
I like(d) the idea of a kit. I talked with the upholstery shop owner about them, and they do install them - no hate for the kits. But for the extra few hundred bucks (front and middle rows, arm rests, center console) and knowing it'll be perfect...
After taking care of the 100K Maintenance items, I decided it was time to give the outside some attention. I had pinstriping down both sides that wouldnt come out with cleaning and wax. I discussed the full process and what I used in this...
I have a set of 5 33x10.50-15 BFg KM on welded fj40 steel wheels.
Tires have over 50% tread.
I was using them on a truck I just sold.
The wheels cost $850 for a set of 5 now so my price is based on that.
$900 for wheels and tires.