- Location
- United States
I am listing this for a friend, these are the features.
Frame is solid,front half stock,rear half narrowed a few inches and boxed itn witha 1/8 inch plate. Front and rear winch mounts
Engine,stock 2f, 6 to 1 headers.to custom stock size exhaust,rebuilt alternator,rebuilt starter. Weber carb with new throttle cable, rebuilt alternator.runs good.
Drive train,pilot bearing new,clutch used but Ok,New from C.C clutchslave and master cylinder, stock 4 speed,stock transfer case,stock drive shafts but with custom lengths.
Axels, stock axles with 4.11 to 1 ratio,open diffs
Body panels, front body panels are in decent shape,they are perfech for what the truck was intendedfor, not mint but not rotting out.
All the tubing that was used is 1 an three quarters HREW hot rolled electric welded,with1/8wall thickness tubing. All the tubing was bent with a protools ratcheting tube bender not a pipe bender.The flooring of the truck is aluminum diamond plate riveted to angle iron..
Suspension.Spring over front axle,sent stock steering arms out west were they were bent to high steer arms. I did not have the knuckle turned, athey are stock custom welde drag link and tie rod, spring over rear axle, custom spring hangers and rear axle moved back a few inches..
\
Tires. 36"x 14,5x15 Super swampers TSL Radials,steel rims
Fuel cell-RCI 12 gallon with aero quip fittings and fuel hoses
Seats- Old bucket seats that were laying in a garage, with RCI lap belts shoulder belts included but not installed.
I finished this cruiser in June of 06. Since then I have only taken it wheeling twice,both times to paragon, it completed the wampum trail under it's own power.
I will and can deliver this rig with in 4hours of my home at an additional cost which we can work out.
I have about $7000 into this rig as it sits.
Price is $4000 or best offer. More pics if you need them.
This rig would need rear lights to be street legal.
Just a word on this rig, If I had not gotten my trail rig back from Cali I would of bought this truck,as It has a ton of potential and would make a great rock wheeler, and just with a few mods it could be street legal.
Thanks for looking
James
Frame is solid,front half stock,rear half narrowed a few inches and boxed itn witha 1/8 inch plate. Front and rear winch mounts
Engine,stock 2f, 6 to 1 headers.to custom stock size exhaust,rebuilt alternator,rebuilt starter. Weber carb with new throttle cable, rebuilt alternator.runs good.
Drive train,pilot bearing new,clutch used but Ok,New from C.C clutchslave and master cylinder, stock 4 speed,stock transfer case,stock drive shafts but with custom lengths.
Axels, stock axles with 4.11 to 1 ratio,open diffs
Body panels, front body panels are in decent shape,they are perfech for what the truck was intendedfor, not mint but not rotting out.
All the tubing that was used is 1 an three quarters HREW hot rolled electric welded,with1/8wall thickness tubing. All the tubing was bent with a protools ratcheting tube bender not a pipe bender.The flooring of the truck is aluminum diamond plate riveted to angle iron..
Suspension.Spring over front axle,sent stock steering arms out west were they were bent to high steer arms. I did not have the knuckle turned, athey are stock custom welde drag link and tie rod, spring over rear axle, custom spring hangers and rear axle moved back a few inches..
\
Tires. 36"x 14,5x15 Super swampers TSL Radials,steel rims
Fuel cell-RCI 12 gallon with aero quip fittings and fuel hoses
Seats- Old bucket seats that were laying in a garage, with RCI lap belts shoulder belts included but not installed.
I finished this cruiser in June of 06. Since then I have only taken it wheeling twice,both times to paragon, it completed the wampum trail under it's own power.
I will and can deliver this rig with in 4hours of my home at an additional cost which we can work out.
I have about $7000 into this rig as it sits.
Price is $4000 or best offer. More pics if you need them.
This rig would need rear lights to be street legal.
Just a word on this rig, If I had not gotten my trail rig back from Cali I would of bought this truck,as It has a ton of potential and would make a great rock wheeler, and just with a few mods it could be street legal.
Thanks for looking
James
