- Location
- United States
Need this bolt, should have 14 mm head 3.5 long or like 85 mm long with a 10 × 1.25 pitch..if any body has one mine broke.
WTB exhaust/intake bolt 1f
- Thread starter 71greenpig
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
Bought a new bolt but was to large diameter and head was to large.
What size is your old bolt?
Sounds like you're describing a 3/8" bolt. 3/8" = (9.525 mm) DIA and would have a 9/16" (14.2 mm) head and your two thread pitch choices are 20 TPI = 1.27mm or 16 TPI = 1.58mm.
Don't know if this helps but just thought I would through it out in case some one put a SAE bolt in at some point.
Sounds like you're describing a 3/8" bolt. 3/8" = (9.525 mm) DIA and would have a 9/16" (14.2 mm) head and your two thread pitch choices are 20 TPI = 1.27mm or 16 TPI = 1.58mm.
Don't know if this helps but just thought I would through it out in case some one put a SAE bolt in at some point.
- Thread starter
- #4
Will check that out thanks