Wiring 24V Bosch relay

[CDN_Cruzer]

I am just putting the finishing touches on my 3rd battery setup.

I am hooking up a Bosch 0 332 002 250 24V 50Amp Relay to switch the power on and off to my converter and I would like to verify the wiring of the relay.

Which wire do I connect to which pole of the relay. it has 4 pins 30 85 86 87

 

[canucksafari]

See Stone's post in this thread: https://forum.ih8mud.com/70-series-tech/81968-daytime-running-lights-77-24v.html

 

[canucksafari]

This is for the solar laod balancer but will also help you: https://forum.ih8mud.com/diesel-tech-24-volts-systems/33070-solar-converter-final-setup.html. Just search "relay" in this thread.

 

[CDN_Cruzer]

So this is what I have come up with

The 24V relay I have has nice big connectors on 30 and 87 and small ones on 86 and 85 and I want to interrupt the 24V+line from the battery to the inverter.

This is what I can come up with

30 - 24V + from battery
87 - 24V out to converter

or maybe I have those reserved

then either 86 or 85 to either the little power box under the hood and the other one to chassis ground?