Nearing the end of my first 100 build (restoration)and ran into.. what hopefully is the last major hurdle. I am installing a wolf box so needed to run wire for the camera. I pulled a wire through the nipple on the boot of the pass though that is on the passenger side below the hood hinge. I easily got it through the fire wall and through the boot. The issue is now getting the rubber boot back on the plastic housing that is attached to the fire wall. Seems like the white plastic frame needs to be pulled out of firewall to properly place boot around and then clip back in place. I can't get that white frame out and not enough space to wrap the boot back around. Any help would be greatly appreciated.