where do I get my 60 aligned? (1 Viewer)

[meatloaf]

Any shop recommendations? I would prefer south of the river...

Thanks,
Luis

 

[Unoman]

You can do it yourself as long as it is not terribly out of whack. Otherwise, B&B Muffler/Automotive on S.Lamar is a good honest shop.

 

[tucker74]

The only thing that can be adjusted is toe in - loosen TRE nuts, mark tires, measure at front, rotate to back and re-measure, adjust to between 1/8" and 1/4" toe in with cross-link If you need to recenter the wheel, adjust the relay rod the same way until it's centered ....

All you need is jack stands and a couple of wrenches -

Tucker

 

[meatloaf]

Thanks Uno,

My alignment is not bad at all. The thing is that since I went with OME & 33's, the trucks wanders alot and I was told that I would probably need shims. I just want to know how far off it is so that I can order the correct º shims.

Thanks,
Luis

 

[Lake Rat]

If you just went with a 4" lift about a 2 dg shim should do it for you.