I need to tap into a 12v and ground line somewhere behind the radio/climate control area in my 98 LX. I don't have a ton of electrical experience and could use some advice.
My thought was to identify the two wires (either to radio or maybe cig lighter) and use vampire taps.
This is for a bluetooth module similar to below, so I'm especially intersted if there are any considerations to avoid possible ground loop hum, etc. Thanks
My thought was to identify the two wires (either to radio or maybe cig lighter) and use vampire taps.
This is for a bluetooth module similar to below, so I'm especially intersted if there are any considerations to avoid possible ground loop hum, etc. Thanks