what rims fit 70s series?

[CruserDave]

I've heard that some chevy nissan 6 bolt rims fit, are there any other type rims that fit the 70s its for a bj74 and will a stock 60 series bolt pattern fit ??? its been rather frustrating finding another set of rims

 

[Glenn-BJ74]

One option is the 16x8 Mickey Thompson Classic II with advertised 3.625" back spacing (actual is 3.75") - with 315's I need 0.25" spacer up front.

3.50" BS is ideal but I could not find in 16". ION wheels in 15" have a 3.5" BS wheel.

http://www.mickeythompsontires.com/wheels.php?item=ClassicII

 

[roscoFJ73]

I've heard that some chevy nissan 6 bolt rims fit, are there any other type rims that fit the 70s its for a bj74 and will a stock 60 series bolt pattern fit ??? its been rather frustrating finding another set of rims

60 series will fit and yes Nissan patrol will work. Some models of Hilux/Surf are about 10mm difference in back spacing but will work

 

[John Galt]

3.50" BS is ideal but I could not find in 16".

Standard Toyota 16" LC steel wheels meet that spec.

p/n 42601-60262-03, silver 1 piece "D" hole (six hole)

I've got two sets for my truck and they work just fine.

 

[peterb]

Will 80 Series alloy rims fit without a spacer?

 

[CruserDave]

Thanks for the replys, this was very helpfull !!!

 

[hzj79lee]

Will 80 Series alloy rims fit without a spacer?

These are 80 series wheels on hzj75.
http://i1146.photobucket.com/albums/o536/hzj79lee/DSC_0272_zps7036feb8.jpg

http://i1146.photobucket.com/albums/o536/hzj79lee/DSC_0271_zps186708fa.jpg

No spacers

 

[aamiggia]

Will 80 Series alloy rims fit without a spacer?

80 series have same bolt pattern, but on a CDM BJ70, they require 1/4" spacer on the front to clear the tie rod ends.

 

[peterb]

Sorry to hijack but I appreciate the replies!
Peter

 

[NStimac]

Will any of the FJC wheels fit?

 

[hzj79lee]

Will any of the FJC wheels fit?

Check this out.
https://forum.ih8mud.com/70-series-tech/193706-bolt-pattern-bj74.html

 

[Clint79]

80 series have same bolt pattern, but on a CDM BJ70, they require 1/4" spacer on the front to clear the tie rod ends.

That's for the low pinion front diff the spacers are needed.

 

[Jay34]

Sorry for bumping an old thread but I need some info on rim size for a 1996 HZJ77 (Model: KC-HZJ77HV-PEU).
From what I have seen its a 16" x 6" with a 3.5" backspacing. Can someone please confirm this.

The LC will be in Canada within the next month and I would like to have the rims and tires ready. Going to the Toyota dealership was complete waste of time. Any info is much appreciated.

 

[Whistler74]

Jay, if you go to the dealer with the part number (from John Galt above) they should be able to help - just be prepared for the price. Heaviest rims I've ever had!
Generally, you will need a part number and a helpful parts guy if you go to Toyota for anything.

Cheers