What plug wires for my DUI Distributor?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 16, 2005
Threads
18
Messages
340
I need a recommendation to get me through the next few months. Right now I have the DUI with a couple of bad wires. I was going to put some OEM wires on it but the DUI has a post connection and the OEM has a socket type connection. Can I just get a generic brand of wires from Napa?

BTW, I have an OEM distributor that will go back on my rig but it needs to be re-built, so I'm a few months away from doing that. Has anybody gone from after market back to OEM? What's involved? Your help is appreciated.
Thanks
 
I had LiveWires on my DUI but they kinda sucked

That's what I have currently, I don't want another set...probably pricey too.
 
If it's justa gets ya by I'd go with some off the shelf NAPA brand for a GM 250 inch six with HEI.

For something longer term I'd either go with a set of MSD's or a set of Magnecor's.
 
I like Accel #4038.....they are universal (make your own length) 8mm and straight ends....plus they're pretty yellow.....
 
I like Accel #4038.....they are universal (make your own length) 8mm and straight ends....plus they're pretty yellow.....
May or may not make a difference to some, but Accel and Mallory are pretty much one and the same.
Too bad too, AFAIC all of the good Accel product got dumped in favor of the Mallory carp.
 
May or may not make a difference to some, but Accel and Mallory are pretty much one and the same.
Too bad too, AFAIC all of the good Accel product got dumped in favor of the Mallory carp.

WTF!!!..... so you say my long lusted after plug wires are no longer available :confused:
 
Plug wires

Next time you go to the wrecking yard and grab a half dozen that look about right. They'll probably give them to you.
 

Users who are viewing this thread

Back
Top Bottom