What is the backspacing on the stock wheels?

[Beowulf]

What is the stock wheel backspacing?
Do the 17" steelies and 17" alloys have the same backspacing?
Do the 16" TRD alloys have the same as the 17" alloys?

Do all FJC factory wheels have 7" width? I have seen mention that the factory steelies are 17x7½" so that is the reason for the question.

-B-

 

[tlcruiserman]

What is the stock wheel backspacing?
Do the 17" steelies and 17" alloys have the same backspacing?
Do the 16" TRD alloys have the same as the 17" alloys?

Do all FJC factory wheels have 7" width? I have seen mention that the factory steelies are 17x7½" so that is the reason for the question.

-B-

Both the Alloy and the steel wheels (except TRD 16" wheels) are 17" x 7.5" I am petty sure the backspace is 4.5"

I have put the Alloy and steel wheels on 42 series, 70 series, 80 series cruisers. They will work on 4x with not spacers, will require 1" spaces to work best on 60, 70 seris do to the tie rod end (will scrap the wheel when turning to the left on left hand drive models).

Cheers,

Michael

 

[Beowulf]

I am petty sure the backspace is 4.5"

I have put the Alloy and steel wheels on 42 series, 70 series, 80 series cruisers.

Michael,
Am I understanding you correctly? You have installed the FJC 17" alloy wheels on an 80 series cruiser?

If yes, can you post pics?

Thanks,
-B-

 

[tlcruiserman]

Michael,
Am I understanding you correctly? You have installed the FJC 17" alloy wheels on an 80 series cruiser?

If yes, can you post pics?

Thanks,
-B-

Yep I have put some on my HDJ80. I will slip them back on and take some shots over the weekend.

Cheers,

Michael