What about Bob? (4 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Who got that fuel cell?

183318_10150103811662421_501052420_6234187_4782625_n.jpg


Installed and REAL metal straps are on now... the ratchet was just test fitting first...

181623_10150103851657421_501052420_6234759_3394845_n.jpg


Pic of my custom exhaust from headers back... WHOOPS POW!

182211_10150106295577421_501052420_6262899_5776244_n.jpg


Sounds throaty and clean... gonna hafta either find "fake" O2's or weld mine back in somewhere, she running rich.


Exhaust is now outta the way and..... Ready for some tube!!!!
 
Yep, shuntwurx. made from pieces... and totally easily removal... in like 10 minutes if need be...

185924_10150106962232421_501052420_6268557_6639166_n.jpg


181665_10150106962457421_501052420_6268559_3222087_n.jpg


poo poo welds... that and adapter sized ever so carefully...


184805_10150106962792421_501052420_6268563_3223831_n.jpg
 
How big is the fuel cell???? got some good pics of where it hangs?

Hangs?! naw dog, it's bolted into the bed... It's HUGE, but it was free and had most everything I needed already in it. Just needed the factory 80 fuel pump in it...
 
2-26-11 at the GAP

good pic of the fuel cell....

182604_10150090783487109_504382108_6530498_4404385_n.jpg


181959_10150090782892109_504382108_6530492_6024818_n.jpg


182775_10150090784547109_504382108_6530509_6381151_n.jpg
 
180152_1754777862384_1027056047_32004093_6185911_n.jpg


The Shunt

183340_1754783262519_1027056047_32004106_6244715_n.jpg
 
Damn that fuel Cel looks huge.
Is it a 20 gallon?
Or did the pic just add 10'lbs?
 
Damn that fuel Cel looks huge.
Is it a 20 gallon?
Or did the pic just add 10'lbs?

it's big, think it's a 15 though, because I pumped 5 gallons yesterday and it already had some and it filled about 2/3 up. Sadly when I get going up a hill.... it sputters, and once even prevented me from doing an obstacle... "kinks". so either I got to switch the pickup to the back or put the foam back in it. Not sure the foam will help though... thoughts?
 
Foam should help. It's more for safety than anything though.
I would put it in anyway.
there are some fuel cels that have a sump in them that supposed to help.
My stock samurai tank Is built that way. Never had a starving issue. One of the reasons I want to re use it.

Keepin the tank full used to be a cheap fix..
 
more pics of the filth

untitled-1.jpg


These folks were not amuzed that a super hero was rescuing them but our group was loving it... and maybe because their girlfriends were loving it.


183096_1609660717243_1107960116_31368736_4083736_n.jpg


183506_1609661037251_1107960116_31368737_7280193_n.jpg


185950_1609649796970_1107960116_31368720_8202065_n.jpg
 
She winkin at me...the slut

How did the birfs do? No poppa?
 
No poppa this time...

Here's the reason I was not picking up fuel though.... a little vertical...

183342_1661256243681_1005420069_31646150_1783504_n.jpg




Lenny, it's time for tube now that the exhaust is outta the way...
Until I get it over your way, I'm going to clean the body welds and holes up a bit, not too pretty, but "finish" it before tube goes on.
 
Daryl is supposed to be gettIng a 1.75 die. So hopefully it will time out when we can tube out both of your rigs around the same time.
 
Daryl is supposed to be gettIng a 1.75 die. So hopefully it will time out when we can tube out both of your rigs around the same time.

both mine? you mean "our" rigs.
I gotta buy a trailer to get it over there though...
I also gotta pay that flower the iris this year at the same time... also have no place to "store" the trailer once I buy it.... not sure what will happen the next few months...
 

Users who are viewing this thread

Back
Top Bottom