SOLD Wanted: FJ40 Flasher Relay 3-pin pigtail harness

[local523]

Vehicle Model

1. 40 Series

I am in search of the pigtail harness that fits the FJ40 3-pin Flasher Relay. I have the relay. The generic 3-pin pigtails that I've found have been too big and not shaped correctly. Does anyone have the pigtail or can suggest a resource? Pic below for reference.

 

[RevISK]

@Coolerman is the go to electric guy around here.

@ToyotaMatt might also be holding.

 

[ToyotaMatt]

I am in search of the pigtail harness that fits the FJ40 3-pin Flasher Relay. I have the relay. The generic 3-pin pigtails that I've found have been too big and not shaped correctly. Does anyone have the pigtail or can suggest a resource? Pic below for reference.View attachment 3869073

.

- how do you have the Updated OEM TOYOTA Flasher Relay Kit & not the Pigtail part ? they come together from TOYOTA in a kit form kit as you see it above ...


- if you bought a aftermarket relay of some kind ? Please post photos of it below the bottom and BOTH sides where the latching locks tabs are located .....

3 photos are needed to establish the correct profile connector plug for the relay side of things


i was not aware that the black TOYOTA OEM Relay and the white plastic part / connector where 3 wires go in could separated apart ?

 

[local523]

.

- how do you have the Updated OEM TOYOTA Flasher Relay Kit & not the Pigtail part ? they come together from TOYOTA in a kit form kit as you see it above ...


- if you bought a aftermarket relay of some kind ? Please post photos of it below the bottom and BOTH sides where the latching locks tabs are located .....

3 photos are needed to establish the correct profile connector plug for the relay side of things


i was not aware that the black TOYOTA OEM Relay and the white plastic part / connector where 3 wires go in could separated apart ?

ToyotaMatt,

It was an Ebay purchase. The relay is stamped with part #81980-32010 and appears authentic, exactly as pictured above. I didn't realize at the time that the wiring harness was unique to the part. I bought a generic pigtail and tried to adapt it using a Dremel but it didn't turn out well. I'll take some pics when I'm back on location.

Thank you!

 

[local523]

A Cruiser shop was able to find what I needed. Thanks for all the replies.

 

[ToyotaMatt]

A Cruiser shop was able to find what I needed. Thanks for all the replies.

Hi ,

Please check your PM inbox

I happened to have few dozen of these ..,

I will be happy to simply mail you the correct NOS OEM parts kit here …

I can swap out the MALE 2 pin white Smoothie connector for a OEM locking and latching housing


I can also include a harness side female connector same modern locking latch housing ., extra terminals too


there is no cost involved to you on this parts
Kit form OEM kit that is correct for you

The BIG WHITE plug in the relay , I was correct it is NON removable …

Tricky little rascal but GOOD for the owner operator that uses it !


I can ship out today priority mail

KARMA is KING in my little Toyota everything and anything world ..,

It was NOT a coincidence I Stumbled upon a 1 gallon plastic pail filled with these today I can tell you that ……

.