Want to replace lower dash panel....what am I getting into? (1 Viewer)

[Richfj60]

Hi all, I am looking to sort out some things on my 62. I need to replace a cracked evaporator case, replace the dash pad, pull the steering column and fix the column u joints, so I figured that while I was at it, i would replace the dented lower dash panel. Question is- how much an effort is this going to be?

Rich

 

[augirthedude]

Not too bad . Take pictures if you do not have a photographic memory. Lots of small bolts and screws. Patience and time is your friend . I use a small cordless impact with 1/4” drive extensions and wobbly metric sockets . When I had mine out I cleaned up layers of stereo wiring and grime. Look at new seals for the heater and ac ducts/ boxes too.

 

[georgebj60]

Not difficult, but it is time consuming. And then you'll ask yourself "should I rebuild the heater core while I'm here?". And then you'll ask yourself "is this evaporator worth putting back in?". And then you'll ask yourself.....