Victory 4x4 100 Series Build

[CBeckFJ]

whats everyones plan for turn signals? Buying LC side markers and running the signal wires up? I was thinking of running small round LED's in the bumper

I'm tackling this soon on my dobinsons, but small cutouts to fit something like a roadvision 3 way would work. For wiring (found in a mud thread that I no longer can find) you can splice them into a 2 to 3 wire connector, and then into a 7 pin trailer harness

 

[blackohio]

I'm tackling this soon on my dobinsons, but small cutouts to fit something like a roadvision 3 way would work. For wiring (found in a mud thread that I no longer can find) you can splice them into a 2 to 3 wire connector, and then into a 7 pin trailer harness

i ended up buying LC turns, wiring and harnesses.

 

[easyjteasy]

whats everyones plan for turn signals? Buying LC side markers and running the signal wires up? I was thinking of running small round LED's in the bumper

I did this mod last week. Actually pretty straightforward.
ARB on an LX470 (Turn Signal Clarification) - https://forum.ih8mud.com/threads/arb-on-an-lx470-turn-signal-clarification.927721/post-10367312

I used these sockets:

Sockets

For wiring:
Black and white ground wire from the original corner/marker light to the black ground wire on the socket.
Green positive wire from the original corner/marker light to the blue wire on the socket.
Green positive wire from the turn signals from the bumper to the red wire on the socket.

Bought some 1157A bulbs from Autozone.

Cheap fix minus some of the Dremel bits I had to buy.