SOLD UT, SLC - '95 LC - Come get it!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

MDarius

I break stuff.
SILVER Star
Joined
Apr 10, 2006
Threads
177
Messages
2,060
Location
Bountiful, UT
Due to some health issues (I had a stroke recently) I'm done with my parts rig. It's in my shed in Bountiful, UT and I need help getting it out. I'm no use, so "help" is a generous term.

My boys and I started pulling it apart to part it out but soon learned we are lousy at follow up and shipping, so we stopped. The interior is pulled apart and anything that was in decent condition is still there. We removed the damaged body panels and other bits damaged in the accident. I've taken a few useful bits for myself and sold a few, but by and large there's a lot of good stuff there. I wouldn't count on much from the front axle.

Specs: 95 Land Cruiser CDL only. Front end damage. It's been sitting for 6 years.

Watch the video for more.

If you ask me to pull something, want to know if a part is there, or want something shipped, please refer back to the fact that I had a stroke and I don't have the energy to deal with that. I just need a friendly IH8MUD member to help me get it out of my shed and moved on. I'd love $500 for it, but I'll take your help if that's all you've got. Thanks!
 
Wish I were closer, but GA is a long way... I'm sure someone will come to get it, best of luck!
 
Is the 1fz-fe any good? Do you have a title?

Someone needs to make a tube front-end and make that a wheeler!

Front fenders angled way in to a narrowed grill, open up the fenders to fit 38s or even 40s, cut the roof and rear windows out behind the back seat, section the rear a bunch.

I can see it in my head.
 
The engine "ran when parked". It had 220k-ish miles on it. It was a little tired, but was getting 14MPG and using about 1.5 quarts of oil between oil changes. I used all Toyota fluids when possible. I had planned to do a PM HG job on it and all the "while you're in there" stuff, then put it in my '97 and do the same to my '97 engine. Not doing that anymore.

Yes, I have the title.
The rocker shaft sheared in the accident, so the steering box needs to be rebuilt.
 
Interested. I sent a PM.
 
Gone! Thank you!
 

Users who are viewing this thread

Back
Top Bottom