SOLD USED 2010 LX570 ENGINE

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 26, 2010
Threads
133
Messages
887
Vehicle Model
  1. 200 Series
Hi. I will have my engine available for sale in the next couple weeks. It is getting a small amount of coolant into cylinder 4 on start up after sitting 1 hour or more. This causes a misfire setting code p0304. It does it for about 20 seconds then clears up. We confirmed bubbles in cooling system when pressurizing that cylinder. Still running perfectly besides that. No oil consumption between 5k oil change intervals. Has 235k on it but decided to just put another used engine in it to minimize down time. I will post pics and videos in the next couple days. I live in central NJ if anyone is interested. Engine will probably live a long life after fixing the issue. Just checking if anyone is interested before posting on ebay etc. Can assist in delivery within 50 miles of Lawrenceville nj. Pictured is my 2010 lx570 the engine is currently in.

Acceleration video link. Video taken 9/30/24



Cold start video taken 10/1/24



IF INTERESTED PLEASE REACH OUT HERE OR EMAIL ME AT DABZ28@YAHOO.COM

Screenshot_20240924_181922_Photos.jpg


20241003_151041.jpg
 
Last edited:
Awaiting my blackstone oil analysis report. I just took a sample a few days ago. I'll post the results here. Anyone interested in this engine? The shop that's doing the engine swap will be getting back to me in a few days with an offer for my used engine.
 
Not a buyer but I am interested if the Blackstone analysis will detect any coolant in the oil.

Seems like the typical (if you can call it that) UR HG leak where the coating fails at the water passage right next to the cylinder so curious if the analysis detects this failure mode.

Please post the results!
 
Not a buyer but I am interested if the Blackstone analysis will detect any coolant in the oil.

Seems like the typical (if you can call it that) UR HG leak where the coating fails at the water passage right next to the cylinder so curious if the analysis detects this failure mode.

Please post the results!
Yes. I'm awaiting the report. I'll post it
 
Anybody interested in this engine before the shop doing the swap ends up with it?
 
Shop offered me 1k for it so I told them they can have it. I'll still post the results of the oil analysis
 

Users who are viewing this thread

Back
Top Bottom