without the bodylift that jeff's truck had, the stinger looks a little bit big on your truck, maybe its just the pics?, either way its my fault
, but i hope you like it
, but i hope you like it
update (1 Viewer)
- Thread starter Straydog
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
it looks good...but i hope you don't set it on it's nose until you get some reinforcement. Time for a full front Exo. ;p
- Thread starter
- #43
It needs bigger tires. Then It will look right. I'm working on that. I don't put in all this O.T. for nuthin'.
- Thread starter
- #44
Ok, I got the rear v6 third rebuilt (new bearings, lockrite) and I pulled the overloads out of the rear spring packs. They were huge. 3X's the size of any of the springs in the pack. Improved the ride, now I have to see how it flexes.
Removed the prop. valve from the rear brake line. I need the space to trianglate the rear shocks.
Next up... front axle widening and front brake upgrade.
Removed the prop. valve from the rear brake line. I need the space to trianglate the rear shocks.
Next up... front axle widening and front brake upgrade.
Are you going to use the IFS hub bodies to widen the front? That's the way I will probably do it. Also let me know when those front CV axles are out from the 4 Runner chassis, I will be needing them in the next month or so.
- Thread starter
- #46
Thats the plan. I'm going to try to get it this weekend, but I kinda had some side work fall in my lap, or driveway actually. I should at least get those out this weekend. I'll let you know.
- Thread starter
- #47
I flexed this thing out at work with a forklift and a stack of angle iron. It does real well. I'd post pics, but I can't get them from my phone to the computer
Since the suspension is working, I think I'll concentrate on steering and locking the front, and save the spring upgrades until I have the money for bigger tires and gears.
Since the suspension is working, I think I'll concentrate on steering and locking the front, and save the spring upgrades until I have the money for bigger tires and gears.
any progress updates to post?;p
- Thread starter
- #49
I'm going to load the pics soon as I can get it out of the garage. I widened the front axle, swapped to vented rotors, and put the 4.56 third in the front. The reman master cylinder I got from autozone was bad, so I took it back, got my new favorite counter guy, upgraded to a 90 V6 mc(1 in. bore) and a dual diaphram booster. I have 20,000 + points on my card, so my cost for the booster was $2.30. I'm waiting on the cap for the resevoir(dealer part)
Its back on 31's right now. I switched rims to aluminum. I bought irons and did it myself, but I dropped a screwdriver or something in one. I heard it and tried to ignore it, but I think we all know how that ended.
So now I have to break one of my 33's back down and figure out what went wrong.
Anyway, should be all ready Wed nite.
I'm waiting on the cap for the resevoir(dealer part)Its back on 31's right now. I switched rims to aluminum. I bought irons and did it myself, but I dropped a screwdriver or something in one. I heard it and tried to ignore it, but I think we all know how that ended.
So now I have to break one of my 33's back down and figure out what went wrong.
Anyway, should be all ready Wed nite.
- Thread starter
- #50
Wow, did this take forever. It turns out I dropped a wheel weight in the tire when I was changing it
But its together now, so here they are.......
I thought I should get them on today. I'm taking it up to RC for a shakedown run tomorrow. It may not look like this by sunday
But its together now, so here they are.......
I thought I should get them on today. I'm taking it up to RC for a shakedown run tomorrow. It may not look like this by sunday
looks good man, about how much metal did you have to take off the bearing hubs for the rotors to slide over?
i think my bro's 36" sx's would be some sweet trail tires for that thing
...he even lowered the price
i think my bro's 36" sx's would be some sweet trail tires for that thing
...he even lowered the price
- Thread starter
- #52
You have to grind the ears down till they are just above the stud. Thats like .5 in or so? I have an 8in grinder that made it a rather quick job.
The 36's would be perfect, but I kind of hammered the steering Sun, so I think I'm going to have to get that done 1st. The tie rods not supposed to bend up into the springs, right? I'll see how fast I can come up with money. May be sell my plasma cutter........
The 36's would be perfect, but I kind of hammered the steering Sun, so I think I'm going to have to get that done 1st. The tie rods not supposed to bend up into the springs, right?
I'll see how fast I can come up with money. May be sell my plasma cutter........drove by today, looks good in the driveway. trail??????
i think i have a stock mini tie rod if ya need one;p
pm me some info on your plasma, i might be interested
pm me some info on your plasma, i might be interested
- Thread starter
- #55
Not sure. Happend not 10 mins. out of camp between the old office and the the comp course. Mike from RC should know better which it was(hint, hint)
i am not sure exactly of the trail name. i don't think it ever got named, the sign says (new black) for about the past 3 years now.
anyway,it runs from L3 up to the comp course, (parallel to Stair step)
anyway,it runs from L3 up to the comp course, (parallel to Stair step)
I also have a stock rod sitting in the garage if you need, it's on my 85 front axle waiting to be built.
is stair step on the left and that trail to the right?
if its that trail, thats a fun one, i almost rolled my samurai on it last summer
- Thread starter
- #60
I'm going to see if the tree method will do for now. I take the bike to work anyway.