Triangle Monthly Meeting - September 6, 2017

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

so confused

Steve brought his teardrop to the last Triad meeting. It has two 'ports' on the side for an air conditioner that's not used... both of these 'holes' were 'glorified' at the meeting....
 
We'll be there!
 
This will be my first meeting. Is it ok to bring my 8 year old son with me? He's really getting into Cruisers.
 
This will be my first meeting. Is it ok to bring my 8 year old son with me? He's really getting into Cruisers.

Absolutely it is! It's a sports bar, but a family friendly one.
 
I'll be there and Cynthia is bringing her LX to get opinions on how much to sell it for. Everyone wear your tire-kicking shoes.
 
This will be my first meeting. Is it ok to bring my 8 year old son with me? He's really getting into Cruisers.
I am bringing my 11 year old and 8 year old. If Del comes, he has three kids as well.
 
I'll be there and Cynthia is bringing her LX to get opinions on how much to sell it for. Everyone wear your tire-kicking shoes.
SOLD! wait... I should probably ask my wife first.
 
i will still be there, sans troopy as i havent wired the brake lights, plate light or have the plate mounted, and the roof tent is on, but missing mounts of its own. I guess i could have bungee corded everything :-)
 
Typically I bring the kids but today they have practice so it will only be me this time.
 
i will still be there, sans troopy as i havent wired the brake lights, plate light or have the plate mounted, and the roof tent is on, but missing mounts of its own. I guess i could have bungee corded everything :)
Magnets work great.
 
Wish I could make it. I wanted to come out and meet everyone and get apply to join ONSC but my 80 is down due to phh. The phh bypass kit comes in tomorrow though. So hopefully I'll see yall next month!
 
I'm stuck working an outage, hate I'll miss you all...
 
Wish I could make it. I wanted to come out and meet everyone and get apply to join ONSC but my 80 is down due to phh. The phh bypass kit comes in tomorrow though. So hopefully I'll see yall next month!
I had everything you need. Constant tension hose clamps and 2 feet of Gates Green stripe.
 
Thanks to everyone who came out!!

FYI, I drove Cindy's 100 over to my house after the meeting. I took the flange off, shaved down the end to allow the c-clip groove to be exposed, then installed everything again and she was good to go. Got a text this AM that everything was back to normal. Crisis averted thanks to ONSC!
 
Last edited:
Thanks to everyone who came out!!

FYI, I drove Cindy's 100 over to my house after the meeting. I took the flange off, shaved down the end to allow the c-clip groove to be exposed, then installed everything again and she was good to go. Got a text this AM that everything was back to normal. Crisis averted thanks to ONSC!

Thanks Johnny! I can't tell you how much I appreciate it!
 

Users who are viewing this thread

Back
Top Bottom