Toyota OEM Nudge Bar Fitment

[texaswakerep]

Does anyone know if the Toyota OEM Nudge Bar shown here: http://www.toyota.com.au/landcruiser-200/accessories will fit a MY 13 Land Cruiser 200?

I don't want to add the additional weight and have to change out front springs for a Bull bar. So I thought this would be a good way to add additional lighting and minor protection...plus I really like the looks of it. I'm sure it will be expensive to get it to the states, but worth it to me if it accomplishes the above goals.

Thanks in advance for any input!

 

[texaswakerep]

Should have stated that this a US spec Land Cruiser 200 MY 2013 (2012)

 

[WoodyCreature]

Can you order these thing to the us?

 

[texaswakerep]

Can you order these thing to the us?

Yes, but the shipping will be expensive. I have been emailing back and forth with a Toyota dealership in AU as well as a parts vendor.

 

[chimyz]

Should have stated that this a US spec Land Cruiser 200 MY 2013 (2012)

Looks like it would fit, since it is shown on a MY2013.

 

[texaswakerep]

Looks like it would fit, since it is shown on a MY2013.

Agree, I would think so. But being that it's an Australian spec, I hate to spend the money to get it over here and it not fit on my US spec. I'm hoping someone can confirm before I end up with a nudge bar that doesn't fit!

 

[chimyz]

I can't see the Aussie spec being too different from the US spec front.
One thing you could do is check on the Toyota service site. For 15 bucks, you get 48 hours of use. If it is an OEM part, they would have install instructions. That way you could be certain.

 

[chimyz]

Here's a link to the portal:

https://techinfo.toyota.com/techInfoPortal/appmanager/t3/ti?_nfpb=true&_page

 

[texaswakerep]

I got an install manual now, so will need to remove bumper to see if pictures match up.

If anyone is interested in one of these nudge bars, let me know. If they will fit, we could combine shipping to save some coin.

 

[chimyz]

I got an install manual now, so will need to remove bumper to see if pictures match up. If anyone is interested in one of these nudge bars, let me know. If they will fit, we could combine shipping to save some coin.

Check that site I sent...easier than removing bumper cover...it will have body panel instal and removal pics, really in depth too.

I may be interested...let us know what cost would be.

 

[drowningman]

texaswakerep did you get any more info on the Aussie OEM nudge bar? I may be interested as well.

 

[brussum]

I might be interested. How much are they asking for the nudge bar down under?

 

[texaswakerep]

Looks like the conversion would be around $775 for the nudge bar + freight.

I'm going to work on a few things on my 200 when we get back in town from the holidays first of the year. While I'm at it, I'm going to compare the install pics with my front bumper inside and out. I may go ahead and check out the Toyota service site provided by Chimyz as well. Will keep you guys posted.

If anyone is interested in the install manual, PM me your email address.

 

[ggroot30]

Looks like the conversion would be around $775 for the nudge bar + freight.

I'm going to work on a few things on my 200 when we get back in town from the holidays first of the year. While I'm at it, I'm going to compare the install pics with my front bumper inside and out. I may go ahead and check out the Toyota service site provided by Chimyz as well. Will keep you guys posted.

If anyone is interested in the install manual, PM me your email address.

Did you ever purchase and install the nudge bar?

 

[luke27617]

Did you ever purchase and install the nudge bar?

FYI as you may seen on other thread I got the nudge bar for 16LC from AU. Even though it was for Aussie LC, the fit was perfect and no modification were needed from what in the manual. Everything seems identical world wide in either left or right hand drive. I wouldn't worry about install. Just find one designed for your year. Very pleased with mine.

 

[ggroot30]

FYI as you may seen on other thread I got the nudge bar for 16LC from AU. Even though it was for Aussie LC, the fit was perfect and no modification were needed from what in the manual. Everything seems identical world wide in either left or right hand drive. I wouldn't worry about install. Just find one designed for your year. Very pleased with mine.

The nudge bar that they have listed is for the '16-'17 models only it says. I thought that you had a 2013 so I was curious if it fit okay. I contacted Toyota of Australia, but they would not confirm fit for a 2010 one way or another. BTW, do you have a photo of the nudge bar are your cruiser? Is it pretty solid?

 

[luke27617]

The nudge bar that they have listed is for the '16-'17 models only it says. I thought that you had a 2013 so I was curious if it fit okay. I contacted Toyota of Australia, but they would not confirm fit for a 2010 one way or another. BTW, do you have a photo of the nudge bar are your cruiser? Is it pretty solid?

Here it is my thread with the nudge bar. I assume only exterior of LC has changed for 16 and attach points are still identical. Shape of the bumper may be the only problem including bottom of the bumper vent hight where additional attach points are. As you can see in the thread orders being taken. As you can see interest is there. If it doesn't fit, I am sure you can sell it easily to a 16-17 owner.
2016-17 LC200 Aussie Nudge Bar