Tires

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 27, 2005
Threads
118
Messages
300
Installing a 1.5"-2" lift on a 1999 100 series. Keeping stock gearing.

What are the tallest and narrowest size BFG all terrains you would run?

I see on tech forum that 'largest' size tire recommended with stock height is a 285/75/16 but these look a bit wide even with a mild lift.
 
I have 285/75/16 tires on mine with roughly 1.5" of life (866s and leveled torsion bars). They look like they're properly sized. If you're keeping the 16" wheels that's probably the size to go with.

You could do 255/85/16 but most of those are MTs.

Edit: There are better photos out there, but this is what the 285s look like on mine:

LCAustin.jpg
 
Last edited:
If you want tall and narrow, you'll have to go with the KM2 tires in 255/85-16
 
or Toyo M-55's in 255/85/16.
 
Bfg at2s come in 255 85 16 too... I'm thinking of getting them for my next set of street tires.

Looking for 285 75 18s (toyo my) for my tundra steelies for my next set of offroad tires.

Sent from my Thunderbonner using IH8MUD
 
Last edited:
Bfg at2s come in 255 85 16 too... I'm thinking of getting them for my next set of street tires.

Looking for 285 75 18s for my tundra steelies got my next set of offroad tires.

Sent from my Thunderbonner using IH8MUD

255/85/16 isn't listed on BFG's website for the AT. Only the KM2.
 
My bad. You are correct.

Sent from my Thunderbonner using IH8MUD
 
295/75r16 BFG ATs. OME lift. no rubbing.
 

Users who are viewing this thread

Back
Top Bottom